User Manual

Getting Started 1-3
The 1769-SM1 module is compatible with Allen-Bradley PowerFlex
7-Class drives and other products that support DPI. At the time of
publication, compatible products include:
The 1769-SM1 module is compatible with drives and other products that
support SCANport. At the time of publication, compatible products include:
Equipment Shipped with the Module
When you unpack the module, verify that the package includes:
User-Supplied Equipment
To install and configure the 1769-SM1 module, you must supply:
DPI Compatible Products
• PowerFlex 70 drives (standard and enhanced control)
• PowerFlex 700 drives (standard and vector control)
• PowerFlex 700 Ser. B drives (standard and vector control)
• PowerFlex 700H drives
• PowerFlex 700S drives (Phase I and Phase II control)
• PowerFlex 700 Liquid-Cooled drives
• PowerFlex 7000 drives
• SMC Flex
SCANport Compatible Products
• 1305 drives • 1336 REGEN drives • 2364F RGU
• 1336 PLUS drives • 1336 SPIDER drives • SMC Dialog Plus
• 1336 PLUS II drives • 1394 Servo drives • SMP-3
• 1336 IMPACT drives • 1397 drives •
• 1336 FORCE drives • 1557 drives •
Required Equipment
❑ One 1769-SM1 module
❑ This manual
❑ A small flathead screwdriver
❑ Bulletin 1202 Communications Cables (1202-C*)
❑ A configuration tool, such as:
• For drives supporting DPI (PowerFlex):
– PowerFlex HIM on the PowerFlex drive
– DriveExplorer software (version 3.01 or higher)
– DriveExecutive stand-alone software (version 1.01 or higher) or
bundled with the DriveTools SP suite (version 1.01 or higher)
– RSNetWorx for DeviceNet
• For drives supporting SCANport or DPI (PowerFlex):
– Controller configuration software (e.g., RSLogix 500/5000)