User Manual Manual

Publication 1769-UM009E-EN-P - August 2009 99
DeviceNet I/O Image Chapter 6
Fault
This bit displays whether the network is faulted.
• 0 = Network is not faulted
• 1 = Network is faulted
Disable Network
This bit displays whether the network is disabled.
• 0 = Network is not disabled
• 1 = Network is disabled
Device Failure
This bit displays whether any device failures have occurred on the network.
• 0 = No device failures exist
• 1 = Device failure exists (examine the status structure for causes)
Autoverify Failure
This bit displays whether the scanner has failed to initialize any devices on the
network.
• 0 = The scanner has initialized all devices
• 1 = The scanner has failed to initialize at least one device
Comm Failure
This bit displays whether a communication failure exists on the network.
• 0 = No communication failures exist
• 1 = A communication failure exists