User manual

124 Rockwell Automation Publication 1769-UM011I-EN-P - February 2013

Chapter 9 Use a CompactFlash Card

Manually Change the Load Parameters

When you store a project to a CompactFlash card, you define:

• when the project is to load (On Power Up, On Corrupt Memory, User

Initiated).

• mode to which to set the controller (if the keyswitch is in REM and the

load mode is not User Initiated).

To assign a different project to load from the CompactFlash card, edit the

Load.xml file on the card.

1. To change the load parameters for a project, open the XML file with the

same name as the project. Use a text editor to open the file.

IMPORTANT

Be aware that when loading a different project, the firmware revisions must be

the same.

CompactFlash reader

projects and firmware