Technical data

28 Rockwell Automation Publication 1769-TD006C-EN-P - March 2012
1769 Compact I/O Modules Specifications
Input impedance Voltage: 220 kΩ
Current: 250 Ω
Accuracy
(5)
Voltage: ±0.2% full scale @ 25 °C (77 °F)
Current: ±0.35% full scale @ 25 °C (77 °F)
Accuracy drift with temperature Voltage: ±0.003% per °C
Current: ±0.0045% per °C
Nonlinearity ±0.03%
Repeatability
(6)
±0.03%
Module error Voltage: ±0.3%
Current: ±0.5%
Overload at input terminals, max
(7)
Voltage: ±30V DC continuous, 0.1 mA
Current: ±32 mA continuous, ±7.6V DC
Isolation voltage 500V AC or 710V DC for 1 minute (qualification test), group to bus
30V AC/30V DC working voltage (IEC Class 2 reinforced insulation)
Weight, approx 450 g (0.99 lb)
Dimensions (HxWxD), approx 118 x 52.5 x 87 mm (4.65 x 2.07 x 3.43 in.)
Height with mounting tabs 138 mm (5.43 in.)
Slot width 1.5
Module location DIN rail or panel mount
Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4
Power supply distance rating 8 modules
Terminal screw torque 0.68 Nm (6 lbin)
Retaining screw torque 0.46 Nm (4.1 lbin)
Wire size (22…14 AWG) solid
(22…16 AWG) stranded
Wire type Cu-90 °C (194 °F)
Replacement terminal block 1769-RTBN18 (1 per kit)
Replacement door label 1769-RL2 series B (2 per kit)
Replacement door 1769-RD (2 per kit)
Vendor ID code 1
Product type code 10
Product code 38
Enclosure type rating None (open-style)
(1) The over- or under-range flag will come on when the normal operating range (over/under) is exceeded. The module will continue to convert the analog input up to the maximum full scale range. The flag
automatically resets when within the normal operating range.
(2) Resolution is dependent upon your filter selection. The maximum resolution is achieved with either the 50 or 60\ Hz filter selected.
(3) Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input signal and the value that floats above ground potential (for example, 10V DC
input signal and 20V DC potential above ground).
(4) For proper operation, both the plus and minus input terminals must be within ±10V DC of analog common.
(5) Includes offset, gain, nonlinearity, and repeatability error terms.
(6) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.
(7) Damage may occur to the input circuit if this value is exceeded.
Technical Specifications - 1769-IF8
Attribute 1769-IF8