Specifications
Rockwell Automation Publication 1769-TD006E-EN-P - January 2015 115
1769 Compact I/O Modules Specifications
Terminal screw torque 0.68 Nm (6 lbin)
Retaining screw torque 0.46 Nm (4.1 lbin)
Wire size (22…14 AWG) solid
(22…16 AWG) stranded
Wire type Cu-90 °C (194 °F)
Vendor ID code 1
Product type code 109
Product code 37
Enclosure type rating None (open-style)
Table 106 - 1769-BOOLEAN Input Specifications
Attribute 1769-BOOLEAN
Inputs 8 real
8 virtual
Voltage category 24V AC sinking
Operating voltage range 10…30V DC @ 30 °C (86 °F)
10…26V DC @ 60 °C (140 °F)
Digital filter, off to on 0 s, 100 μs, 200 μs, 500 μs, 1 ms, 2 ms, 4 ms, 8 ms
Digital filter, on to off 0 s, 100 μs, 200 μs, 500 μs, 1 ms, 2 ms, 4 ms, 8 ms
Input delay, off to on 10 μs
Input delay, on to off 10 μs
Current draw @ 5.1V 115 mA
Off-state voltage, max 5V DC
Off-state current, max 1.5 mA
On-state voltage, min 10V DC
On-state current, min 2 mA
Inrush current, max
(1)
(1) A current limiting resistor can be used to limit inrush current; however, the operating characteristics of the AC input circuit will be affected. If a 6.8 kΩ (2.5 W minimum) resistor is placed in series with the
input, the inrush current is reduced to 35 mA. In this configuration the minimum on-state voltage increases to 92V AC. Before adding the resistor in a hazardous environment, be sure to consider the
operating temperature of the resistor and the temperature limits of the environment. The operating temperature of the resistor must remain below the temperature limit of the environment.
250 mA
Input impedance, max 2.0 kΩ @ 24V DC
2.3 kΩ @ 30V DC
IEC input compatibility Type 1+
Isolation voltage Verified by one of the following dielectric tests: 1200V AC for 1 s or 1697V DC for 1 s, input
point to bus
75V DC working voltage (IEC Class 2 reinforced insulation)
Table 105 - Technical Specifications - 1769-BOOLEAN
Attribute 1769-BOOLEAN