Specifications

ManualsBrandsRockwell Automation ManualsConsumer electronics1769-PB4

Technical Document

1769 Compact I/O Modules Specifications

Catalog Numbers

1769 Series

The 1769 Compact I/O™ modules can be used with a CompactLogix™ controller, as well as for expansion I/O in a

MicroLogix™ 1500 controller assembly or in an assembly with a 1769-ADN DeviceNet adapter module. Unless connected

to a MicroLogix 1500 base, each bank of I/O modules must include its own power supply.

Install the I/O modules on a panel with two mounting screws or on a DIN rail. The modules mechanically lock together by

means of a tongue-and-groove design and have an integrated communication bus that is connected from module to module

by a moveable bus connector.

Topic Page

Summary of Changes 2

I/O Module Overview 2

Place Compact I/O Modules 4

Digital I/O Modules 5

Analog I/O Modules 6

Specialty I/O Modules 6

Compact I/O Accessories 125

Compact I/O Mounting Dimensions 129

Wiring Systems 130

Additional Resources 130

Summary of content (132 pages)

PAGE 1
Technical Document 1769 Compact I/O Modules Specifications Catalog Numbers 1769 Series Topic Page Summary of Changes 2 I/O Module Overview 2 Place Compact I/O Modules 4 Digital I/O Modules 5 Analog I/O Modules 6 Specialty I/O Modules 6 Compact I/O Accessories 125 Compact I/O Mounting Dimensions 129 Wiring Systems 130 Additional Resources 130 The 1769 Compact I/O™ modules can be used with a CompactLogix™ controller, as well as for expansion I/O in a MicroLogix™ 1500 controller assembly
PAGE 2
1769 Compact I/O Modules Specifications Summary of Changes This manual contains new and updated information. Changes throughout this revision are marked by change bars, as shown to the right of this paragraph.
PAGE 3
1769 Compact I/O Modules Specifications Available 1769 I/O Modules I/O Type Cat. No. Page Cat. No.
PAGE 4
1769 Compact I/O Modules Specifications Table 1 - Environmental Specifications - 1769 I/O Modules Attribute 1769-IA8I, 1769-IA16, 1769-IM12, 1769OA8, 1769-OA16, 1769-IQ16, 1769-IQ16F, 1769-IQ32, 1769-IQ6XOW4, 1769-OB8, 1769OB16, 1769-OB16P, 1769-OB32, 1769-OV16, 1769-OW8, 1769-OW8I, 1769-OW16 1769-IF4, 1769-IF4XOF2, 1769-IR6, 1769-IT6 1769-ARM, 1756-HSC 1769-IG16, 1769-IQ32T, 1769-OB32T, 1769OG16, 1769-OV32T 1769-IF4I, 1769-IF8, 1769-IF16C, 1769IF16V, 1769-OF2, 1769-OF4CI, 1769-OF4VI, 1769-OF8C, 1769-OF8
PAGE 5
1769 Compact I/O Modules Specifications Controller Supports Location Considerations 1769-L35CR 1769-L35E 30 local modules 3 separate banks The additional banks are powered by standard 1769 power supplies and connect to the main rack by using standard 1769 expansion cables.
PAGE 6
1769 Compact I/O Modules Specifications Analog I/O Modules Choose analog, thermocouple, or RTD modules for these features: • Individually configurable channels • Ability to individually enable and disable channels • On-board scaling • Auto calibration of inputs • Online configuration • Selectable input filters • Over-range and under-range detection and indication • Selectable response to a broken input sensor • Selectable power source • Input modules offer both single-ended or differential inputs • Ability
PAGE 7
1769 Compact I/O Modules Specifications 1769-IA8I Compact individually-isolated 120V AC input module 1769-IA8I L1a 100/120V AC AC COM 0 L2a IN 0 L1b 100/120V AC AC COM 1 L2b IN 1 L1c 100/120V AC L2c AC COM 2 AC COM3 AC COM4 AC COM5 AC COM6 AC COM7 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 NC NC Table 2 - Technical Specifications - 1769-IA8I Attribute 1769-IA8I Inputs 8 individually isolated Voltage category 100/120V AC Operating voltage range 79…132V AC, 47…63 Hz Input delay, on 20 ms Input delay
PAGE 8
1769 Compact I/O Modules Specifications Table 2 - Technical Specifications - 1769-IA8I Attribute 1769-IA8I Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.) Slot width 1 Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 9
1769 Compact I/O Modules Specifications 1769-IA16 Compact 120V AC input module 1769-IA16 L1 IN 0 IN 1 IN 2 IN 3 IN 4 IN 5 100/120V AC IN 6 IN 7 IN 8 IN 9 IN 10 IN 11 IN 12 IN 13 IN 14 IN 15 L2 AC COM AC COM Commons are connected internally.
PAGE 10
1769 Compact I/O Modules Specifications Table 4 - Technical Specifications - 1769-IA16 Attribute 1769-IA16 Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 11
1769 Compact I/O Modules Specifications 1769-IF4 Compact voltage/current analog input module 1769-IF4 Single-ended Sensor/Transmitter Inputs 1769-IF4 Differential Inputs Belden 8761 Cable (or equivalent) – Analog Source V/I in 0 ANLG Com V/I in 1 ANLG Com V/I in 2 ANLG Com V/I in 3 ANLG Com DC NEUT + V in 0 + Sensor/ Transmitter Supply + - Current + V in 0 + V/I in 0 - Signal I in 0 + ANLG Com V in 1 + I in 0+ V in 1 + I in 1+ Earth ground the shield locally at the module.
PAGE 12
1769 Compact I/O Modules Specifications Table 6 - Technical Specifications - 1769-IF4 Attribute 1769-IF4 Inputs 4 differential or single-ended Input range ±10V 0…10V 0…5V 1…5V 0…20 mA 4…20 mA Full scale range(1) ±10.5V -0.5…10.5V -0.5…5.25V 0.5…5.25V 0…21 mA 3.2…21 mA Current draw @ 5.1V 120 mA Current draw @ 24V 60 mA Heat dissipation, max 2.
PAGE 13
1769 Compact I/O Modules Specifications Table 6 - Technical Specifications - 1769-IF4 Attribute 1769-IF4 Retaining screw torque 0.46 N m (4.
PAGE 14
1769 Compact I/O Modules Specifications 1769-IF4I Compact voltage/current analog, individually-isolated input module 1769-IF4I Single-ended Sensor/Transmitter Inputs 1769-IF4I Differential Inputs Belden 8761 Cable (or equivalent) Analog Source Sensor/ + Transmitter Supply Current + Signal Voltage + Ground Signal Voltage Ground Signal + 1769-IF4I Mixed Transmitter Inputs Sensor/ Transmitter Supply Ch0+ + - N/C Ch0_iRtn Current + N/C Signal Ch0Ch1+ N/C Ch1_iRtn Voltage N/C Ground Signal
PAGE 15
1769 Compact I/O Modules Specifications Table 9 - Technical Specifications - 1769-IF4I Attribute 1769-IF4I Inputs 4 isolated differential Input range ±10V 0…10V 0…5V 1…5V 0…20 mA 4…20 mA Full scale range(1) ±10.5V -0.5…10.5V -0.5…5.25V 0.5…5.25V 0…21 mA 3.2…21 mA Bus current draw 5V DC, 140 mA 24V DC, 110 mA Heat dissipation, max 3.
PAGE 16
1769 Compact I/O Modules Specifications Table 9 - Technical Specifications - 1769-IF4I Attribute 1769-IF4I Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 17
69 Compact I/O Modules Specifications 1769-IF4XOF2 Compact combination input/output analog module 1769-IF4XOF2 Differential Inputs 1769-IF4XOF2 Outputs Belden 8761 Cable (or equivalent) V in 0+ I in 0+ I in 1+ V in 2+ I in 2+ V in 3+ I in 0+ V in 2 + V/I in 2- V/I in 3 - – Differential Voltage Transmitter Earth ground the shield locally at the module.
PAGE 18
1769 Compact I/O Modules Specifications Table 12 - Technical Specifications - 1769-IF4XOF2 Attribute 1769-IF4XOF2 Current draw @ 5.1V 120 mA Current draw @ 24V 160 mA Heat dissipation, max 3.03 W Weight, approx 290 g (0.64 lb) Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.
PAGE 19
1769 Compact I/O Modules Specifications Table 13 - 1769-IF4XOF2 Input Specifications Attribute 1769-IF4XOF2 Accuracy drift with temperature Current: ±0.006% per °C Voltage: ±0.006% per °C Nonlinearity ±0.4% Repeatability(6) ±0.4% (7) Overload at input terminals, max Current: ±32 mA continuous, ±5V DC Voltage: ±20V DC continuous, 0.
PAGE 20
1769 Compact I/O Modules Specifications Table 14 - 1769-IF4XOF2 Output Specifications Attribute 1769-IF4XOF2 Output impedance 10 kΩ Open and short-circuit protection Yes Short-circuit, max 40 mA Open circuit, max 15V Output response at system powerup and power down +2.0…-1.
PAGE 21
1769 Compact I/O Modules Specifications 1769-IF4FXOF2F Compact combination fast input/output analog module 1769-IF4FXOF2F Differential Inputs Simplified Input Circuit Diagram Belden 8761 Cable (or equivalent) V in 1+ + V in 0+ V/I in 0- V/I in 1 I in 1+ V in 3+ V/I in 3 - – I in 0+ V in 2 + V/I in 2- Differential Voltage Transmitter Earth ground the shield locally at the module.
PAGE 22
1769 Compact I/O Modules Specifications 1769-IF4FXOF2F Outputs V in 0+ I in 0+ V/I in 0 V in 1+ I in 1+ V/I in 1V in 2+ I in 2+ V/I in 2V in 3+ I in 3+ Voltage V/I in 3- Earth Ground ANLG Com ANLG Com V out 0+ I out 0+ V out 1+ Current I out 1 + Earth Ground Table 17 - Technical Specifications - 1769-IF4FXOF2F Attribute 1769-IF4FXOF2F Current draw @ 5.1V 220 mA Current draw @ 24V 120 mA Heat dissipation, max 3.39 W Weight, approx 290 g (0.
PAGE 23
1769 Compact I/O Modules Specifications Table 18 - 1769-IF4FXOF2F Input Specifications Attribute 1769-IF4FXOF2F Inputs 4 differential or single-ended Input range ±10V 0…10V 0…5V 1…5V 0…20 mA 4…20 mA Full scale range(1) ±10.5V -0.5…10.5V -0.5…5.25V 0.5…5.25V 0…21 mA 3.
PAGE 24
1769 Compact I/O Modules Specifications Table 19 - 1769-IF4FXOF2F Output Specifications Attribute 1769-IF4FXOF2F Outputs 2 single-ended Output range ±10V 0…10V 0…5V 1…5V 0…20 mA 4…20 mA Full scale range(1) ±10.5V -0.5…10.5V -0.5…5.25V 0.5…5.25V 0…21 mA 3.2…21 mA Resolution 13 bits (unipolar) 13 bits plus sign (bipolar) Conversion rate (all channels), max 1 ms Step response to 63%(2) 2.
PAGE 25
1769 Compact I/O Modules Specifications Table 20 - Response Speed - 1769-IF4FXOF2F Filter Frequency Channel Step Response 5 Hz 802 ms 10 Hz 401 ms 50 Hz 81 ms 60 Hz 65 ms 100 Hz 42 ms 250 Hz 17 ms 500 Hz 10 ms 1000 Hz 5 ms Table 21 - Certifications - 1769-IF4FXOF2F Certification(1) 1769-IF4FXOF2F c-UL C-UL certified (under CSA C22.2 No. 142) UL 508 listed Class I, Division 2 Group A,B,C,D Hazardous Locations (UL 1604, C-UL under CSA C22.2 No.
PAGE 26
1769 Compact I/O Modules Specifications 1769-IF8 Compact voltage/current analog input module 1769-IF8 Differential Inputs Belden 8761 Cable (or equivalent) Analog Source – V/I in 0ANLG Com V/I in 1ANLG Com V/I in 2ANLG Com V/I in 3ANLG Com NC + V in 0+ I in 0+ V in 1+ I in 1+ – V/I in 4ANLG Com Earth ground the shield locally at the module.
PAGE 27
1769 Compact I/O Modules Specifications 1769-IF8 Mixed Transmitter Inputs The sensor power supply must be rated Class 2. Signal Single-ended Voltage V in 0 + V/I in 0 - + – + Differential Voltage – Signal – V/I in 1 - – V in 2 + V/I in 2 - + I in 2 + ANLG Com + Signal Differential Current I in 1 + ANLG Com V in 3 + + – I in 0 + ANLG Com V in 1 + V/I in 3 I in 3 + 2-wire Current Signal + ANLG Com NC NC Wiring for channels 4-7 are identical.
PAGE 28
1769 Compact I/O Modules Specifications Table 22 - Technical Specifications - 1769-IF8 Attribute Accuracy 1769-IF8 (5) Voltage: ±0.2% full scale @ 25 °C (77 °F) Current: ±0.35% full scale @ 25 °C (77 °F) Accuracy drift with temperature Voltage: ±0.003% per °C Current: ±0.0045% per °C Nonlinearity ±0.03% Repeatability (6) ±0.03% Module error Voltage: ±0.3% Current: ±0.5% Overload at input terminals, max(7) Voltage: ±30V DC continuous, 0.1 mA Current: ±32 mA continuous, ±7.
PAGE 29
1769 Compact I/O Modules Specifications Table 23 - Response Speed - 1769-IF8 Filter Frequency Update Time Per Channel Update Time Per Module 10Hz 100 ms 400 ms 50 Hz 30 ms 120 ms 60 Hz 30 ms 120 ms 250 Hz 9 ms 36 ms 500 Hz 6 ms 24 ms Table 24 - Certifications - 1769-IF8 Certification(1) 1769-IF8 c-UL C-UL certified (under CSA C22.2 No. 142) UL 508 listed Class I, Division 2 Group A,B,C,D Hazardous Locations (UL 1604, C-UL under CSA C22.2 No.
PAGE 30
1769 Compact I/O Modules Specifications 1769-IF16C Compact current analog input module 1769-IF16C Sensor/Transmittor Inputs Simplified Input Circuit Diagram VLOCAL VLOCAL VLOCAL VLOCAL Sensor/ + Transmitter Supply Current + Signal 10 M 20 K 200 + IN+ Gain 249 0.1 µF COM 20 K M u l t i p l e x e r Current A/D + Ground Signal IN0+ IN1+ IN2+ IN3+ IN4+ IN5+ IN6+ IN7+ Com Com IN8+ IN9+ IN10+ IN11+ IN12+ IN13+ The sensor power supply must be rated Class 2.
PAGE 31
1769 Compact I/O Modules Specifications Table 25 - Technical Specifications - 1769-IF16C Attribute 1769-IF16C Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 32
1769 Compact I/O Modules Specifications 1769-IF16V Compact voltage analog input module 1769-IF16V Sensor/Transmittor Inputs Simplified Input Circuit Diagram VLOCAL VLOCAL VLOCAL VLOCAL Sensor/ + Transmitter Supply Voltage + Signal 10 M 20 K 200 + IN+ Gain 0.1 µF COM 20 K M u l t i p l e x e r Voltage A/D + Ground Signal IN0+ IN1+ IN2+ IN3+ IN4+ IN5+ IN6+ IN7+ Com Com IN8+ IN9+ IN10+ IN11+ IN12+ IN13+ IN14+ IN15+ The sensor power supply must be rated Class 2.
PAGE 33
1769 Compact I/O Modules Specifications Table 28 - Technical Specifications - 1769-IF16V Attribute Repeatability 1769-IF16V (6) ±0.06% Module error 1.0% (7) Overload at input terminals, max ±30 mA continuous, ±7.6V DC Isolation voltage 500V AC or 710V DC for 1 minute (qualification test), group to bus 30V AC/30V DC working voltage (IEC Class 2 reinforced insulation) Weight, approx 281 g (0.62 lb) Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.
PAGE 34
1769 Compact I/O Modules Specifications Table 29 - Response Speed - 1769-IF16V Filter Frequency Step Response Update per Input Pari Update per Module 16 Hz 1550 ms 200 ms 1600 ms 50 Hz 500 ms 70 ms 560 ms 60 Hz 420 ms 60 ms 480 ms 315 Hz 90 ms 15 ms 120 ms 1365 Hz 35 ms 5 ms 40 ms Table 30 - Certifications - 1769-IF16V Certification(1) 1769-IF16V c-UL C-UL certified (under CSA C22.2 No.
PAGE 35
1769 Compact I/O Modules Specifications 1769-IG16 Compact TTL input module Simplified Input Circuit Diagram • • • • • Use Belden 8761, or equivalent, shielded wire. Do not connect more than 2 wires to any single terminal. DC power cable and I/O cables should not exceed 10 m (30 ft). The capacitors shown above must be 0.01μF and rated for 2000V min. User power supply must be rated Class 2 with a 5V DC range of 4.5…5.5V DC. Low to True Format - 1769-IG16 • -0.2…0.
PAGE 36
1769 Compact I/O Modules Specifications Table 31 - Technical Specifications - 1769-IG16 Attribute 1769-IG16 On-state voltage, typical -0.2…0.8V DC On-state current, nom 3.7 mA @ 5V DC Isolation voltage Verified by one of the following dielectric tests: 1200V AC for 2 s or 1697V DC for 2 s, input point to bus 75V DC working voltage (IEC Class 2 reinforced insulation) Weight, approx 250 g (0.55 lb) Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.
PAGE 37
1769 Compact I/O Modules Specifications 1769-IM12 Compact 240V AC input module 1769-IM12 L1 IN 0 IN 1 IN 2 IN 3 IN 4 IN 5 200/240V AC IN 6 IN 7 IN 8 IN 9 IN 10 IN 11 NC NC NC NC L2 AC COM AC COM Commons are connected internally. Do not use the NC terminals as a connection.
PAGE 38
1769 Compact I/O Modules Specifications Table 33 - Technical Specifications - 1769-IM12 Attribute 1769-IM12 Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 39
1769 Compact I/O Modules Specifications 1769-IQ16 Compact 24V DC sink/source input module 1769-IQ16 +DC (sinking) -DC (sourcing) IN 0 IN 1 IN 2 24V DC IN 3 IN 4 IN 5 IN 6 IN 7 +DC (sinking) -DC (sourcing) DC COM 1 -DC (sinking) +DC (sourcing) IN 9 IN 8 IN 11 24V DC IN 10 IN 13 IN 12 IN 15 -DC (sinking) +DC (sourcing) DC COM 2 IN 14 Table 35 - Technical Specifications - 1769-IQ16 Attribute 1769-IQ16 Inputs 16 (8 points/group) Voltage category 24V DC sink/source Operating voltage range 10…30V
PAGE 40
1769 Compact I/O Modules Specifications Table 35 - Technical Specifications - 1769-IQ16 Attribute 1769-IQ16 Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 41
1769 Compact I/O Modules Specifications 1769-IQ16F Compact 24V DC sink/source, high-speed input module 1769-IQ16F +DC (sinking) -DC (sourcing) IN 0 IN 1 IN 2 24V DC IN 3 IN 4 IN 5 IN 6 IN 7 +DC (sinking) -DC (sourcing) DC COM 1 -DC (sinking) +DC (sourcing) IN 9 IN 8 IN 11 24V DC IN 10 IN 13 IN 12 IN 15 -DC (sinking) +DC (sourcing) DC COM 2 IN 14 Table 37 - Technical Specifications - 1769-IQ16F Attribute 1769-IQ16F Inputs 16 (8 points/group) Voltage category 24V DC sink/source Operating volta
PAGE 42
1769 Compact I/O Modules Specifications Table 37 - Technical Specifications - 1769-IQ16F Attribute 1769-IQ16F Slot width 1 Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 43
1769 Compact I/O Modules Specifications 1769-IQ32 Compact 24V DC sink/source input module 1769-IQ32 +DC (Sinking) – DC (Sourcing) IN 1 IN 3 IN 5 IN 7 +DC (Sinking) – DC (Sourcing) IN 0 IN 17 IN 2 24VDC IN 19 IN 4 IN 21 IN 6 DC COM 1 IN 23 – DC (Sinking) + DC (Sourcing) + DC (Sinking) – DC (Sourcing) IN 11 IN 13 – DC (Sinking) + DC (Sourcing) IN 18 24VDC IN 20 IN 22 DC COM 3 – DC (Sinking) + DC (Sourcing) + DC (Sinking) – DC (Sourcing) IN 9 24VDC IN 16 IN 25 IN 8 24VDC IN 10 IN 12 IN
PAGE 44
1769 Compact I/O Modules Specifications Table 39 - Technical Specifications - 1769-IQ32 Attribute 1769-IQ32 Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 45
1769 Compact I/O Modules Specifications 1769-IQ32T Compact 24V DC sink/source, terminated input module 1769-IQ32T Table 41 - Technical Specifications - 1769-IQ32T Attribute 1769-IQ32T Inputs 32 terminated (8 points/group) Voltage category 24V DC sink/source Operating voltage range 20.4…26.4V DC @ 60 °C (140 °F) Digital filter, off to on 0 s, 100 μs, 500 μs, 1 ms, 2 ms, 4 ms, 8 ms Digital filter, on to off 0 s, 100 μs, 500 μs, 1 ms, 2 ms, 4 ms, 8 ms Input delay, off to on 0.1 ms, typical 0.
PAGE 46
1769 Compact I/O Modules Specifications Table 41 - Technical Specifications - 1769-IQ32T Attribute 1769-IQ32T Off-state voltage, max 11V DC Off-state current, max 1.7 mA On-state voltage, min 19V DC On-state current, min 2 mA Inrush current, max 5 mA Input impedance, nom 5.
PAGE 47
1769 Compact I/O Modules Specifications 1769-IQ6XOW4 Compact combination 24V DC sink/source input and AC/DC relay output module Simplified Input Circuit Diagram 1769-IQ6XOW4 Vcc IN CR OUT 0 CR OUT 2 3K VAC VDC L1 or +DC OUT 1 CR OUT 3 CR L2 or -DC NC DC COM 0.
PAGE 48
1769 Compact I/O Modules Specifications Table 43 - Technical Specifications - 1769-IQ6XOW4 Attribute 1769-IQ6XOW4 IEC input compatibility Type 1+ Replacement terminal block 1769-RTBN18 (1 per kit) Replacement door label 1769-RL1 (2 per kit) Replacement door 1769-RD (2 per kit) Vendor ID code 1 Product type code 7 Product code 66 Enclosure type rating None (open-style) Table 44 - 1769-IQ6XOW4 Input Specifications Attribute 1769-IQ6XOW4 Inputs 6 Voltage category 24V DC sink/source Ope
PAGE 49
1769 Compact I/O Modules Specifications Table 46 - Relay Contact Ratings - 1769-IQ6XOW4 Volts, max Continuous Amps per Point, max Amperes(1) Voltamperes NEMA ICS 2-125 Make Break Make Break 7.5 A 0.75 A 1800 VA 180 VA 120V AC 15 A 1.5 A 125V DC 0.22 A(2) 240V AC 24V DC 2.5 A 1.0 A 2.0 A 1.2 A (2) C300 28 VA R150 28 VA — (1) Connecting surge suppressors across your external inductive load will extend the life of the relay contacts.
PAGE 50
1769 Compact I/O Modules Specifications 1769-IR6 Compact RTD/resistance input module Two Wire RTD Configuration Cable Shield (to Ground) Add Jumper RTD EXC RTD EXC Return Return EXC 3 SENSE 3 RTN 3 Belden 9501 Shielded Cable EXC 4 Three Wire RTD Configuration Cable Shield (to Ground) EXC 3 SENSE 3 RTN 3 RTD EXC RTD EXC Sense Sense Return Return Belden 83503 or 9533 Shielded Cable EXC 4 Four Wire RTD Configuration Cable Shield (to Ground) EXC 3 SENSE 3 RTN 3 RTD EXC RTD EXC Sense Sens
PAGE 51
1769 Compact I/O Modules Specifications Two Wire Potentiometer Configuration • Cable Shield (to Ground) Add Jumper Potentiometer RTD EXC EXC 3 SENSE 3 Return RTN 3 Belden 9501 Shielded Cable Cable Shield (to Ground) Add Jumper Potentiometer RTD EXC EXC 3 SENSE 3 Return RTN 3 Belden 9501 Shielded Cable Three Wire Potentiometer Configuration Cable Shield (to Ground) Run RTD EXC and sense wires from the module to potentiometer terminal and tie terminal to one point.
PAGE 52
1769 Compact I/O Modules Specifications Table 48 - Data Formats for RTD Temperature Ranges for 0.5 and 1.
PAGE 53
1769 Compact I/O Modules Specifications Table 51 - Technical Specifications - 1769-IR6 Attribute 1769-IR6 Inputs 6 RTD inputs Input range 0…150 Ω 0…500 Ω 0…1000 Ω 0…3000 Ω Resolution Input filter and configuration dependent Sensors supported 100, 200, 500, 1000 Ω Platinum 385 100, 200, 500, 1000 Ω Platinum 3916 120 Ω Nickel 672 120 Ω Nickel 618 10 Ω Nickel-iron 518 Current draw @ 5.1V 100 mA Current draw @ 24V 45 mA Heat dissipation, max 1.
PAGE 54
1769 Compact I/O Modules Specifications Table 51 - Technical Specifications - 1769-IR6 Attribute 1769-IR6 (2) Repeatability (50/60 Hz filter) ±0.01 °C (0.018 °F) for Ni and NiFe ±0.2 °C (0.36 °F) for other RTD inputs ±0.04 W for 150 W resistances ±0.2 W for other resistances Open circuit detection time(3) 6 ms…303s Isolation voltage 720V DC for 1 minute, optical and magnetic (qualification), channel to bus 30V AC/30V DC working voltage (IEC Class 2 reinforced insulation) Weight, approx 276 g (0.
PAGE 55
1769 Compact I/O Modules Specifications Table 52 - RTD Accuracy and Temperature Drift - 1769-IR6 RTD Type Scaled Accuracy Max 25 °C (77 °F) with Calibration Scaled Accuracy Max 0…60 °C (32…140 °F) with Calibration) Temperature Drift Max from 25 °C (77 °F) without Calibration Copper 426 10 Ω ±0.6 °C (1.08 °F) ±1.1 °C (1.98 °F) ±0.032 °C/°C (0.032 °F/°F) Nickel 618 120 Ω ±0.2 °C (±0.36 °F) ±0.4 °C (±0.72 °F) ±0.012 °C/°C (±0.012 °F/°F) Nickel 672 120 Ω ±0.2 °C (±0.36 °F) ±0.4 °C (±0.
PAGE 56
1769 Compact I/O Modules Specifications Table 54 - Certifications - 1769-IR6 Certification(1) 1769-IR6 c-UL C-UL certified (under CSA C22.2 No. 142) UL 508 listed Class I, Division 2 Group A,B,C,D Hazardous Locations (UL 1604, C-UL under CSA C22.2 No. 213) CE CE compliant for all applicable directives C-Tick Australian Radiocommunications Act, compliant with: • AS/NZS CISPR 11; Industrial Enclosure (1) When marked. See the Product Certification link at http://www.ab.
PAGE 57
1769 Compact I/O Modules Specifications 1769-IT6 Compact Thermocouple/mV input module CJC Sensor NC CJC 0+ + IN 0+ IN 0- CJC 0- + - IN 3+ IN 1 + IN 3- IN 1- IN 4+ Ungrounded Thermocouple CJC 1+ NC Millivolt Input Type ± 50 mV ± 100 mV Range -50…+50 mV -100…+100 mV Input Type + - CJC 1- IN 5- °C Temperature Range -210…+1200 °C -270…+1370 °C -270…+400 °C -270…+1000 °C 0…+1768 °C 0…+1768 °C +300…+1820 °C -210…+1300 °C 0…+2315 °C Within 10V DC IN 2- IN 5+ Thermocouple Type J K T E R S
PAGE 58
1769 Compact I/O Modules Specifications IMPORTANT To reduce the effects of electrical noise, install the 1769-IT6 module at least two slots away from the AC power supplies. Table 55 - Technical Specifications - 1769-IT6 Attribute 1769-IT6 Inputs 6 RTD inputs 2 CJC sensors Input range 0…150 Ω 0…500 Ω 0…1000 Ω 0…3000 Ω Resolution Input filter and configuration dependent Thermocouples B, E, J, K, R, S, T, N, C Bus current draw 5V DC, 140 mA 24V DC, 30 mA Heat dissipation, max 1.
PAGE 59
1769 Compact I/O Modules Specifications Table 55 - Technical Specifications - 1769-IT6 Attribute 1769-IT6 Wire type Cu-90 °C (194 °F) IEC input compatibility Type 1+ Replacement terminal block 1769-RTBN18 (1 per kit) Replacement door label 1769-RL2 series B (2 per kit) Replacement door 1769-RD (2 per kit) Vendor ID code 1 Product type code 10 Product code 36 Enclosure type rating None (open-style) (1) Rated working voltage is the maximum continuous voltage that can be applied at the inp
PAGE 60
1769 Compact I/O Modules Specifications Table 57 - Accuracy - 1769-IT6 Input Type(1) With Autocalibration Enabled Without Autocalibration Accuracy(2) (3) for 10, 50 and 60 Hz Filters (max) Temperature Drift (max)(2) (4) @ 25 °C (77 °F) Ambient @ 0…60 °C @ 0…60 °C (32…140 °F) Ambient (32…140 °F) Ambient Thermocouple J (-210…1200 °C [-346…2192 °F]) ±0.6 °C [± 1.1 °F] ±0.9 °C [± 1.7 °F] ±0.0218 °C/°C [±0.0218 °F/°F] Thermocouple N (-200…+1300 °C [-328…2372 °F]) ±1 °C [± 1.8 °F] ±1.5 °C [±2.
PAGE 61
1769 Compact I/O Modules Specifications 1769-OA8 Compact 100/240V AC solid state output module 1769-OA8 Simplified Output Circuit Diagram Vcc 51 VAC Z CR OUT0 CR OUT2 27 L1 VAC 1 OUT1 CR OUT3 CR L2 470V 150 0.
PAGE 62
1769 Compact I/O Modules Specifications Table 59 - Technical Specifications - 1769-OA8 Attribute 1769-OA8 Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 63
1769 Compact I/O Modules Specifications Temperature Derating - 1769-OA8 1769-OA8 Maximum Amperes per Point versus Temperature 0.50 Maximum Amperes per Point 0.45 0.40 0.35 0.30 0.25 30˚C (86˚F) 40˚C (104˚F) 50˚C (122˚F) 60˚C (140˚F) Ambient Temperature 1769-OA8 Maximum Amperes per Module versus Temperature Maximum Amperes per Module 4.0 3.0 2.
PAGE 64
1769 Compact I/O Modules Specifications 1769-OA16 Compact 120/240V AC solid state output module 1769-OA16 Simplified Output Circuit Diagram Vcc 51 VAC CR OUT 0 CR OUT 2 CR OUT4 CR Z OUT6 27 0.
PAGE 65
1769 Compact I/O Modules Specifications Table 61 - Technical Specifications - 1769-OA16 Attribute 1769-OA16 Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.) Slot width 1 Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 66
1769 Compact I/O Modules Specifications Temperature Derating - 1769-OA16 1769-OA16 Maximum Amperes per Point versus Temperature 0.50 Maximum Amperes per Point 0.45 0.40 0.35 0.30 0.25 30˚C (86˚F) 40˚C (104˚F) 50˚C (122˚F) 60˚C (140˚F) Ambient Temperature 1769-OA16 Maximum Amperes per Module versus Temperature Maximum Amperes per Module 8.0 6.0 4.
PAGE 67
1769 Compact I/O Modules Specifications 1769-OB8 Compact solid state 24V DC source, high-current output module 1769-OB8 Simplified Output Circuit Diagram Logic Side User Side CR OUT 0 OUT 2 VDC DC COM 1 DC - NC VCC NC OUT NC ASIC CR OUT 4 CR OUT 6 DC COM 2 COM DC+ +VDC 1 OUT 1 OUT 3 CR NC NC NC DC+ +VDC 2 OUT 5 CR OUT 7 CR DC- Table 63 - Technical Specifications - 1769-OB8 Attribute 1769-OB8 Outputs 8 (4 points/group) Voltage category 24V DC source Operating voltage range 20
PAGE 68
1769 Compact I/O Modules Specifications Table 63 - Technical Specifications - 1769-OB8 Attribute 1769-OB8 Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 69
1769 Compact I/O Modules Specifications 1769-OB16 Compact solid state 24V DC source output module 1769-OB16 Simplified Output Circuit Diagram +VDC OUT 0 CR OUT 2 OUT 4 S 10K G Vcc CR 15K OUT 0.
PAGE 70
1769 Compact I/O Modules Specifications Table 65 - Technical Specifications - 1769-OB16 Attribute 1769-OB16 Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 71
1769 Compact I/O Modules Specifications Table 66 - Certifications - 1769-OB16 Certification(1) 1769-OB16 c-UL C-UL certified (under CSA C22.2 No. 142) UL 508 listed Class I, Division 2 Group A,B,C,D Hazardous Locations (UL 1604, C-UL under CSA C22.2 No. 213) CE CE compliant for all applicable directives C-Tick C-Tick compliant for all applicable directives Australian Radiocommunications Act, compliant with: • AS/NZS CISPR 11; Industrial Enclosure (1) When marked.
PAGE 72
1769 Compact I/O Modules Specifications 1769-OB16P Compact solid state 24V DC source, protected output module 1769-OB16P Simplified Output Circuit Diagram Vcc 6V +VDC Voltage Regulator 100pF CR OUT 0 CR OUT 2 OUT 4 39V 39V OUT 47K CR OUT 6 CR OUT 8 OUT 10 OUT 12 OUT 14 DC COM DC COM +DC +VDC OUT 1 CR OUT 3 CR OUT 5 OUT 7 CR OUT 9 CR OUT 11 CR OUT 13 CR 24V DC OUT 15 Protection circuit is not shown.
PAGE 73
1769 Compact I/O Modules Specifications Table 67 - Technical Specifications - 1769-OB16P Attribute 1769-OB16P Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 74
1769 Compact I/O Modules Specifications Temperature Derating - 1769-OB16P 1769-OB16P Maximum Amperes per Point versus Temperature 1.00 Maximum Amperes per Point 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 30˚C (86˚F) 40˚C (104˚F) 50˚C (122˚F) 60˚C (140˚F) Ambient Temperature 1769-OB16P Maximum Amperes per Module versus Temperature 8.00 Maximum Amperes per Module 7.50 7.00 6.50 6.00 5.50 5.00 4.50 4.
PAGE 75
1769 Compact I/O Modules Specifications 1769-OB32 Compact solid state 24V DC source output module 1769-OB32 CR OUT 0 CR OUT 2 OUT 4 CR CR OUT 6 +DC +VDC 1 OUT 1 CR OUT 3 CR CR OUT 16 CR OUT 18 OUT 20 OUT 5 OUT 7 OUT 8 OUT 9 OUT 10 OUT 11 OUT 12 OUT 13 OUT 14 DC OUT 15 COM 1 CR 24V DC CR OUT 22 CR OUT 24 CR OUT 26 CR OUT 28 CR +DC +VDC 2 OUT 17 CR OUT 19 CR OUT 21 OUT 23 CR OUT 25 CR OUT 27 CR OUT 29 CR OUT 30 DC OUT 31 COM 2 24V DC -DC -DC Simplified Output Cir
PAGE 76
1769 Compact I/O Modules Specifications Table 69 - Technical Specifications - 1769-OB32 Attribute 1769-OB32 Isolation voltage Verified by one of the following dielectric tests: 1200V AC for 1 s or 1697V DC for 1 s, output point to bus 75V DC working voltage (IEC Class 2 reinforced insulation) Weight, approx 450 g (0.992 lb) Dimensions (HxWxD), approx 118 x 52.5 x 87 mm (4.65 x 2.07 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.) Slot width 1.
PAGE 77
1769 Compact I/O Modules Specifications Temperature Derating - 1769-OB32 1769-OB32 Maximum Amperes per Point versus Temperature 1.00 0.95 0.90 Maximum Amperes per Point 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 30˚C (86˚F) 40˚C (104˚F) 50˚C (122˚F) 60˚C (140˚F) Ambient Temperature 1769-OB32 Maximum Amperes per Module versus Temperature 8.00 Maximum Amperes per Module 7.50 7.00 6.50 6.00 5.50 5.00 4.50 4.
PAGE 78
1769 Compact I/O Modules Specifications 1769-OB32T Compact solid state 24V DC source, terminated output module 1769-OB32T Simplified Output Circuit Diagram Logic Side +VDC 1 +VDC 2 +VDC 1 +VDC 2 User Side VDC S TR1 G VCC ASIC 24V DC D 24V DC OUT COM Table 71 - Technical Specifications - 1769-OB32T Attribute 1769-OB32T Outputs 32 terminated (16 points/group) Voltage category 24V DC source Operating voltage range 10.2…26.4V DC Output delay, on 0.5 ms Output delay, off 4.
PAGE 79
1769 Compact I/O Modules Specifications Table 71 - Technical Specifications - 1769-OB32T Attribute 1769-OB32T Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 80
1769 Compact I/O Modules Specifications 1769-OF2 Compact voltage/current output analog module 1769-OF2 V out 0 + Voltage I out 0 + ANLG Com Earth Ground NC V out 1 + I out 1 + Current ANLG Com Earth Ground External 24V DC Power Supply (optional) + - NC +24V DC DC NEUT The external power supply must be rated Class 2, with a 24V DC range of 20.4…26.4V DC and 60 mA minimum. Series B and later modules support this option.
PAGE 81
1769 Compact I/O Modules Specifications Table 73 - Technical Specifications - 1769-OF2 Attribute 1769-OF2 Load range on voltage output > 1 kΩ @ 10V DC Inductive load (current outputs), max 0.1 mH Capacitive load (voltage outputs), max 1 μF Field calibration None required Accuracy (3) Voltage: ±0.5% full scale @ 25 °C (77 °F) Current: ±0.35% full scale @ 25 ° C (77 °F) Accuracy drift with temperature Voltage: ±0.0086% per °C Current: ±0.0058% per °C Output ripple(4) ±0.
PAGE 82
1769 Compact I/O Modules Specifications Table 73 - Technical Specifications - 1769-OF2 Attribute 1769-OF2 Product type code 10 Product code 32 Enclosure type rating None (open style) (1) The over- or under-range flag will come on when the normal operating range (over/under) is exceeded. The module will continue to convert the analog input up to the maximum full scale range. The flag automatically resets when within the normal operating range.
PAGE 83
1769 Compact I/O Modules Specifications 1769-OF4 Compact voltage/current output analog module Simplified Schematic Isolation ASIC 18-pin Terminal Block Voltage Optocouplers 16-pin Backplane Connector Indicator Output D to A CPU Converter Current Output Isolated DC to DC Converter +15V V out 3+ I out 3+ V out 2+ Voltage Load I out 2+ Earth Ground I out 0+ V out 1+ Current Load +5V GND -15V ANLG Com ANLG Com V out 0+ I out 1 + Earth Ground Table 75 - Technical Specifications - 1769-OF4
PAGE 84
1769 Compact I/O Modules Specifications Table 75 - Technical Specifications - 1769-OF4 Attribute Repeatability 1769-OF4 (5) ±0.05% Module error 0…60 °C (32…140 °F) +/-0.8% of full scale Output impedance Voltage output: < 1 Ω Current output: > 1 MΩ Open and short-circuit protection Yes Short-circuit protection, max 40 mA Output overvoltage protection Yes Output response at system power up and power down 2.5…-1.
PAGE 85
1769 Compact I/O Modules Specifications (6) Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input signal and the value that floats above ground potential (for example, 10V DC input signal and 20V DC potential above ground). (7) If the optional 24V DC Class 2 power supply is used, the 24V DC current draw from the bus is 0 mA. Table 76 - Certifications - 1769-OF4 Certification(1) 1769-OF4 c-UL C-UL certified (under CSA C22.2 No.
PAGE 86
1769 Compact I/O Modules Specifications 1769-OF4CI Compact current output, individually-isolated analog module 1769-OF4CI Current Earth Ground Table 77 - Technical Specifications - 1769-OF4CI Attribute 1769-OF4CI Outputs 4 differential, individually isolated Output range 0…20 mA 4…20 mA Full scale range(1) 0…21 mA 3.2…21 mA Resolution 16 bits (unipolar) 0…20 mA: 15.91 bits, 0.323 μA/bit 4…20 mA: 15.59 bits, 0.323 μA/bit Bus current draw 5V DC, 145 mA 24V DC, 120 mA Heat dissipation, max 2.
PAGE 87
1769 Compact I/O Modules Specifications Table 77 - Technical Specifications - 1769-OF4CI Attribute 1769-OF4CI Output impedance >1 MΩ Open and short-circuit protection Yes Short-circuit protection, max 21 mA Output overvoltage protection Yes Output response at system powerup and power down No current glitch Rated working voltage (6) 30V AC/30V DC Isolation voltage 500V AC or 710V DC for 1 min (qualification test), output group to bus 30V AC/30V DC working voltage (IEC Class 2 reinforced insu
PAGE 88
1769 Compact I/O Modules Specifications Environmental Specifications - 1769-OF4CI Attribute 1769-OF4CI Temperature, storage -40…85 °C (-40…185 °F) Temperature, operating 0…60 °C (32…140 °F) Relative humidity 5…95% noncondensing Altitude, operating 2000 m (6561 ft) Vibration, operating 10…500 Hz, 5 g, 0.030 in.
PAGE 89
1769 Compact I/O Modules Specifications 1769-OF4VI Compact voltage output, individually isolated analog module 1769-OF4VI Voltage Earth Ground Table 79 - Technical Specifications - 1769-OF4VI Attribute 1769-OF4VI Outputs 4 differential, individually isolated Output range(1) ±10V DC 0…10V DC 0…5V DC 1…5V DC Full scale range ±10.5V DC -0.5…10.5V DC -0.5…5.25V DC 0.5…5.25V DC Resolution 15 bits plus sign (bipolar) ±10V DC: 15.89 bits, 330 μV/bit 0…10V DC: 14.89 bits, 330 μV/bit 0…5V DC: 13.
PAGE 90
1769 Compact I/O Modules Specifications Table 79 - Technical Specifications - 1769-OF4VI Attribute 1769-OF4VI Accuracy drift with temperature Output ripple (4) Nonlinearity Repeatability ±0.0086% FS per °C ±0.05% @ 0…50 kHz ±0.05% (5) ±0.05% Module error ±0.8% Output impedance <1Ω Open and short-circuit protection Yes Short-circuit protection, max 35 mA typical 42 mA, max Output overvoltage protection Yes Output response at system powerup and power down Powerup: ±1.2V DC spike for < 0.
PAGE 91
1769 Compact I/O Modules Specifications (3) Includes offset, gain, nonlinearity, and repeatability error terms. (4) Output ripple is the amount a fixed output varies with time, assuming a constant load and temperature. (5) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.
PAGE 92
1769 Compact I/O Modules Specifications 1769-OF8C Compact current output analog module 1769-OF8C I out 0+ ANLG Com ANLG Com I out 1+ ANLG Com I out 2+ ANLG Com Current I out 3+ ANLG Com Earth Ground External 24V DC Power + Supply (optional) - I out 4+ ANLG Com I out 5+ ANLG Com I out 6+ ANLG Com I out 7+ DC NEUT +24V DC The external power supply must be rated Class 2, with a 24V DC range of 20.4…26.4V DC and 60 mA minimum. Series B and later modules support this option.
PAGE 93
1769 Compact I/O Modules Specifications Table 82 - Technical Specifications - 1769-OF8C Attribute 1769-OF8C Accuracy drift with temperature Output ripple (4) Nonlinearity Repeatability ±0.0058% per °C ±0.05% @ 0…50 kHz ±0.05% (5) ±0.05% Module error ±0.55% Offset error ±0.05% Output impedance > 1 MΩ Open and short-circuit protection Yes Short-circuit protection, max 21 mA Output overvoltage protection Yes Output response at system powerup and power down ±0.
PAGE 94
1769 Compact I/O Modules Specifications (3) Includes offset, gain, nonlinearity, and repeatability error terms. (4) Output ripple is the amount a fixed output varies with time, assuming a constant load and temperature. (5) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.
PAGE 95
1769 Compact I/O Modules Specifications 1769-OF8V Compact voltage output analog module 1769-OF8V V out 0+ ANLG Com ANLG Com V out 1+ ANLG Com V out 2+ ANLG Com Voltage V out 3+ ANLG Com Earth Ground External 24V DC Power + Supply (optional) - V out 4+ ANLG Com V out 5+ ANLG Com V out 6+ ANLG Com V out 7+ DC NEUT +24V DC The external power supply must be rated Class 2, with a 24V DC range of 20.4…6.4V DC and 60 mA minimum. Series B and later modules support this option.
PAGE 96
1769 Compact I/O Modules Specifications Table 84 - Technical Specifications - 1769-OF8V Attribute 1769-OF8V Field calibration None required Accuracy (3) ±0.5% full scale @ 25 °C (77 °F) Accuracy drift with temperature Output ripple (4) Nonlinearity Repeatability ±0.0086% per °C ±0.05% @ 0…50 kHz ±0.05% (5) ±0.05% Module error ±0.8% Offset error ±0.
PAGE 97
1769 Compact I/O Modules Specifications (1) The over- or under-range flag will come on when the normal operating range (over/under) is exceeded. The module will continue to convert the analog input up to the maximum full scale range. The flag automatically resets when within the normal operating range. (2) Step response is the period of time between when the D/A converter was instructed to go from minimum to full range until the device is at 63% of full range.
PAGE 98
1769 Compact I/O Modules Specifications 1769-OG16 Compact TTL output module Simplified Output Circuit Diagram • • • • • Use Belden 8761, or equivalent, shielded wire. Do not connect more than two wires to any single terminal. DC power cable and I/O cables should not exceed 10 m (30 ft). The capacitors shown above must be 0.01 μF and rated for 2000V min. User power supply must be rated Class 2 with a 5V DC range of 4.5…5.5V DC. Low to True Format - 1769-OG16 • 0…0.
PAGE 99
1769 Compact I/O Modules Specifications Table 86 - Technical Specifications - 1769-OG16 Attribute 1769-OG16 Current per point, max 24 mA Isolation voltage Verified by one of the following dielectric tests: 1200V AC for 2 s or 1697V DC for 2 s, output point to bus 75V DC working voltage (IEC Class 2 reinforced insulation) Weight, approx 250 g (0.55 lb) Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.
PAGE 100
1769 Compact I/O Modules Specifications 1769-OV16 Compact solid state 24V DC sink output module 1769-OV16 Simplified Output Circuit Diagram +DC +VDC +VDC Vcc CR OUT 0 CR OUT 2 10K OUT 1 CR OUT 3 CR OUT 4 OUT 5 100pF 0.1µF D OUT 6.8 K CR OUT 6 CR OUT 8 CR OUT 9 CR OUT 11 CR OUT 13 CR 24V DC (sink) OUT 10 G 4.
PAGE 101
1769 Compact I/O Modules Specifications Table 88 - Technical Specifications - 1769-OV16 Attribute 1769-OV16 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 102
1769 Compact I/O Modules Specifications Table 89 - Certifications - 1769-OV16 Certification(1) 1769-OV16 c-UL C-UL certified (under CSA C22.2 No. 142) UL 508 listed Class I, Division 2 Group A,B,C,D Hazardous Locations (UL 1604, C-UL under CSA C22.2 No. 213) CE CE compliant for all applicable directives C-Tick C-Tick compliant for all applicable directives Australian Radiocommunications Act, compliant with: • AS/NZS CISPR 11; Industrial Enclosure (1) When marked.
PAGE 103
1769 Compact I/O Modules Specifications 1769-OV32T Compact solid state 24V DC sink, terminated output module 1769-OV32T Simplified Output Circuit Diagram +VDC 1 +VDC 2 +VDC 1 +VDC 2 +VDC ~ OUT DC COM Table 90 - Technical Specifications - 1769-OV32T Attribute 1769-OV32T Outputs 32 terminated (16 points/group) Voltage category 24V DC sink Operating voltage range 10.2…26.4V DC Output delay, on < 16V, 1.5 ms >= 16V, 1.0 ms Output delay, off 4.0 ms Bus current draw 5V DC, 0.
PAGE 104
1769 Compact I/O Modules Specifications Table 90 - Technical Specifications - 1769-OV32T Attribute 1769-OV32T Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 105
1769 Compact I/O Modules Specifications 1769-OW8 Compact AC/DC relay contact module Simplified Output Circuit Diagram 1769-OW8 +24V VAC - VDC OUT 0 CR L2 or -DC L1 or +DC OUT 1 CR OUT 3 CR OUT 5 CR L2 or -DC OUT 2 VAC-VDC 2 L1 or +DC OUT VAC-VDC 1 CR OUT 4 OUT 7 CR OUT 6 Table 92 - Technical Specifications - 1769-OW8 Attribute 1769-OW8 Outputs 8 normally open (4 points/group) Operating voltage range 5…265V AC 5…125V DC Delay, on 10 ms Delay, off 10 ms Current draw @ 5.
PAGE 106
1769 Compact I/O Modules Specifications Table 92 - Technical Specifications - 1769-OW8 Attribute 1769-OW8 Wire size (22…14 AWG) solid (22…16 AWG) stranded Wire type Cu-90 °C (194 °F) Replacement terminal block 1769-RTBN10 (1 per kit) Replacement door label 1769-RL1 (2 per kit) Replacement door 1769-RD (2 per kit) Vendor ID code 1 Product type code 7 Product code 86 Enclosure type rating None (open style) Table 93 - Relay Contact Ratings - 1769-OW8 Volts, max 240V AC Continuous Amps pe
PAGE 107
1769 Compact I/O Modules Specifications 1769-OW8I Compact AC/DC individually isolated, relay contact module 1769-OW8I Simplified Output Circuit Diagram L1a or +DCa +24V L2a or -DCa VAC-VDC CR OUT 0 VAC-VDC 0 L1b or +DCb L2b or -DCb OUT 1 VAC-VDC 1 L1c or +DCc L2c or -DCc OUT 2 VAC-VDC 2 OUT VAC-VDC 3 VAC-VDC 4 OUT 4 VAC-VDC 5 OUT 5 VAC-VDC 6 OUT 6 VAC-VDC 7 OUT 7 NC NC OUT 3 Table 95 - Technical Specifications - 1769-OW8I Attribute 1769-OW8I Outputs 8 normally open, individually isolated (
PAGE 108
1769 Compact I/O Modules Specifications Table 95 - Technical Specifications - 1769-OW8I Attribute 1769-OW8I Module location DIN rail or panel mount Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Power supply distance rating 8 modules Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 109
1769 Compact I/O Modules Specifications 1769-OW16 Compact AC/DC relay contact module 1769-OW16 Simplified Output Circuit Diagram +24V OUT 0 VAC - VDC CR CR VAC-VDC 1 L1 or +DC OUT 1 CR OUT 3 CR OUT 2 OUT 4 OUT 5 OUT 6 OUT 7 CR L2 or -DC VAC-VDC 2 L1 or +DC OUT OUT 9 CR OUT 11 CR OUT 8 CR CR OUT 10 OUT 13 OUT 12 OUT 14 OUT 15 CR L2 or -DC Table 98 - Technical Specifications - 1769-OW16 Attribute 1769-OW16 Outputs 16 normally open (8 points/group) Operating voltage range 5…265V
PAGE 110
1769 Compact I/O Modules Specifications Table 98 - Technical Specifications - 1769-OW16 Attribute 1769-OW16 Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 111
1769 Compact I/O Modules Specifications 1769-ARM Compact address reserve module Use the 1769-ARM address reserve module in CompactLogix systems to cost-effectively reserve module slots. After creating the CompactLogix system’s I/O configuration and user program, any I/O module in the system can be removed and replaced with a 1769-ARM module once the removed module is inhibited by using RSLogix 5000 programming software.
PAGE 112
1769 Compact I/O Modules Specifications 1769-ASCII Compact ASCII module RS-422 Wiring RS-232 Wiring Module to DTE Device (hardware handshaking disabled) ASCII DTE DTE 1 2 NC RXD DCD TXD 3 4 5 TXD NC COM RSD DSR COM 6 7 8 9 NC RTS CTS NC DTR CTS RTS GND 9-pin 25-pin 1 8 3 2 6 2 3 6 5 4 8 7 20 5 7 4 1 ASCII 1 2 TXD- NC 3 NC 4 RXD5 COM 6 RXD+ 7 RTS 8 CTS 9 TXD+ ASCII DTE 1 NC 2 RXD DTE CD TXD 9-pin 1 3 25-pin 8 2 ASCII 2 NC 3 4 RXD DSR COM DTR 2 6 5 3 6 7 3 4 NC 4 8 7
PAGE 113
1769 Compact I/O Modules Specifications Table 103 - Technical Specifications - 1769-ASCII Attribute 1769-ASCII Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.
PAGE 114
1769 Compact I/O Modules Specifications 1769-BOOLEAN Compact combination 24V DC sink input/source output BOOLEAN control module Simplified Input Schematic Do not use the NC terminals as connection points. Simplified Output Schematic +VDC OUT x OUT DC COM Table 105 - Technical Specifications - 1769-BOOLEAN Attribute 1769-BOOLEAN Current draw @ 5.1V 220 mA Current draw @ 24V 0 mA Heat dissipation, max 3.
PAGE 115
1769 Compact I/O Modules Specifications Table 105 - Technical Specifications - 1769-BOOLEAN Attribute 1769-BOOLEAN Terminal screw torque 0.68 N m (6 lb in) Retaining screw torque 0.46 N m (4.
PAGE 116
1769 Compact I/O Modules Specifications Table 107 - 1769-BOOLEAN Output Specifications Attribute 1769-BOOLEAN Outputs 4 Voltage category 24V DC, sourcing Operating voltage range 20.4…26.4V DC (1) Output delay, on 10 μs, output on-state current > 5 mA (1) Output delay, off 10 μs, output on-state current > 5 mA Off-state leakage current, max (2) 1.0 mA @ 26.4V DC On-state current, max 1.0 mA On-state voltage drop, max 1.0V DC @ 1 A Current per point, max 0.5 A @ 60 °C (140 °F) 1.
PAGE 117
1769 Compact I/O Modules Specifications Temperature Derating - 1769-BOOLEAN 1769-BOOLEAN Maximum Amperes per Point versus Temperature Maximum Amperes per Point 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 30 ˚C (86 ˚F) 40 ˚C (104 ˚F) 50 ˚C (122 ˚F) 60 ˚C (140 ˚F) Ambient Temperature 1769-BOOLEAN Maximum Amperes per Module versus Temperature 4 Maximum Amperes per Module 3.8 3.6 3.4 3.2 3 2.8 2.6 2.4 2.
PAGE 118
1769 Compact I/O Modules Specifications 1769-HSC Compact high-speed counter module Cable Differential Encoder Wiring +VDC VS See the encoder manual for proper cable type. The type of cable used should be twisted pair, individually shielded cable with a maximum length of 300 m (1000 ft).
PAGE 119
1769 Compact I/O Modules Specifications Discrete Device Wiring +VDC COM Proximity Sensor Power Supply VS A1(+) OUT A1(–) COM VS Solid-State Switch OUT B1(+) COM B1(–) VS R OUT (1) Z1(+) COM Z1(–) Photoelectric Sensor with Open Collector Sinking Output Module Inputs External resistors are required if they are not internal to the encoder. The pull-up resistor (R) value depends on the power supply value.
PAGE 120
1769 Compact I/O Modules Specifications Table 109 - Technical Specifications - 1769-HSC Attribute 1769-HSC Bus current draw 425 mA, 5V DC 0 mA, 24V DC Heat dissipation, max 6.21 W, the Watts per point, plus the min Watts, with all points energized Isolation voltage 75V (continuous), reinforced insulation type, channel-to-system and channel-to-channel Type tested at 1200V AC for 2 s Weight, approx 309 g (0.681 lb) Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.
PAGE 121
1769 Compact I/O Modules Specifications Table 110 - 1769-HSC Input Specifications Attribute 1769-HSC Phase separation, min 131 ns Input frequency, max 1 MHz Isolation voltage Verified by one of the following dielectric tests: 1200V AC or 1697V DC for 1 s, input to bus and input to input 75V DC working voltage (IEC Class 2 reinforced insulation) (1) See Compact I/O Modules Installation Instructions, publication 1769-IN088.
PAGE 122
1769 Compact I/O Modules Specifications Table 112 - Environmental Specifications - 1769-HSC Attribute 1769-HSC Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g, 11 ms panel mounted 20 g, 11 ms DIN rail mounted Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) 40 g, panel mounted 30 g, DIN rail mounted Emissions CISPR 11 Group 1, Class A ESD immunity IEC 61000-4-2 6 kV contact discharges 8 kV air discharges Radiated RF immunity IEC 61000-4-3 10V/m with 1 kHz sine-wave
PAGE 123
1769 Compact I/O Modules Specifications Maximum Output Voltage - 24V DC Operation Voltage Derating Based on Temperature 31 Volts (DC) 30 29 28 26.4V DC @ 55 °C (131 °F) 27 26 0 ˚C (32 ˚F) 10 ˚C (50 ˚F) 20 ˚C (68 ˚F) 30 ˚C (86 ˚F) 40 ˚C (104 ˚F) 50 ˚C (122 ˚F) 60 ˚C (140 ˚F) 70 ˚C (158 ˚F) Ambient Temperature Temperature Derated Voltage 0…40 °C (32…104 °F) 30V DC 55…60 °C (131…140 °F) 26.
PAGE 124
1769 Compact I/O Modules Specifications Maximum Output Current per Point - 24V DC Operation Current Derating Based on Temperature Current per Point (A) 1.5 1 0.5 0 0 ˚C (32 ˚F) 10 ˚C (50 ˚F) 0.25 A at 60 °C (140 °F) 20 ˚C (68 ˚F) 30 ˚C (86 ˚F) 40 ˚C (104 ˚F) 50 ˚C (122 ˚F) 60 ˚C (140 ˚F) 70 ˚C (158 ˚F) Ambient Temperature Temperature Derated Current 0…40 °C (32…104 °F) 1A 55 °C (131 °F) 0.5 A 60 °C (140 °F) 0.
PAGE 125
1769 Compact I/O Modules Specifications Compact I/O Accessories Category Cat. No. Description End cap 1769-ECL Left-end cap for Compact I/O system 1769-ECR Right-end cap for Compact I/O system 1769-CLL1 Left bank-to-left bank expansion 305 mm (1 ft) 1769-CLL3 Left bank-to-left bank expansion 1 m (3.28 ft) 1769-CRR1 Right bank-to-right bank expansion 305 mm (1 ft) 1769-CRR3 Right bank-to-right bank expansion 1 m (3.
PAGE 126
1769 Compact I/O Modules Specifications Mounting Dimensions - 1769-ECL 87 mm (3.43 in.) 15 mm (0.59 in.) 118 mm (4.65 in.) Mounting Dimensions - 1769-ECR 32 mm (1.26 in.) 85 mm (3.35 in.) 18 mm (0.71 in.) 118 mm (4.65 in.
PAGE 127
1769 Compact I/O Modules Specifications Table 115 - Certifications - 1769-ECL, 1769-ECR Certification(1) 1769-ECL c-UL UL Listed for Class I, Division 2 Group A, B, C, D Hazardous Locations, certified for U.S. and Canada.
PAGE 128
1769 Compact I/O Modules Specifications Dimensions - 1769-CLLx, 1769-CRRx, 1769-CRLx 15 mm (0.59 in.) 1769-CLLx 32 mm (1.26 in.) 32 mm (1.26 in.) 18 mm (0.71 in.) 18 mm (0.71 in.) 1769-CRRx 1769-CRLx 118 mm (4.65 in.) 15 mm (0.59 in.) 118 mm (4.65 in.) 118 mm (4.65 in.) Table 118 - Certifications - 1769-CLLx, 1769-CRRx, 1769-CRLx Certification(1) 1769-CLLx, 1769-CRRx, 1769-CRLx c-UL C-UL certified (under CSA C22.2 No.
PAGE 129
1769 Compact I/O Modules Specifications Compact I/O Mounting Dimensions Single 1769 Slot Dimensions 35 mm (1.38 in.) 87 mm (3.42 in.) 131.7 mm (5.18 in.) One-and-a-half 1769 Slot Dimensions 56.5 mm (2.22 in.) 87 mm (3.42 in.) 131.7 mm (5.18 in.
PAGE 130
1769 Compact I/O Modules Specifications Wiring Systems As an alternative to buying removable terminal blocks (RTBs) and connecting the wires yourself, you can buy a wiring system of: • interface modules (IFMs) that provide the output terminal blocks for digital I/O modules. Use the pre-wired cables that match the I/O module to the IFM. • analog interface modules (AIFMs) that provide the output terminal blocks for analog I/O modules. Use the prewired cables that match the I/O module to the AIFM.
PAGE 131
1769 Compact I/O Modules Specifications Notes: Rockwell Automation Publication 1769-TD006E-EN-P - January 2015 131
PAGE 132
Important User Information Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.