Specifications

54
1768-SG001A-EN-P -- March 2006
CompactLogix Selection Guide
RRSSLLooggiixx EEmmuullaattee 55000000
SSooffttwwaarree
RSLogix Emulate 5000 software (9310-WED200ENE) is the emulation package for the
Logix5000 controllers. RSLogix Emulate 5000 software used in conjunction with RSLogix
5000 software lets you run and debug your application code while at your computer. In
addition, RSLogix Emulate 5000 software also lets you test HMI screens, developed in
RSView software for example, without the need to connect to a real controller.
You can set tracepoint and breakpoint instructions (ladder diagram only) in your
application code, use traces, and also vary the execution speed of the emulator. RSLogix
Emulate 5000 software supports all the programming languages (ladder diagram, function
block diagram, structured text, and sequential function chart). RSLogix Emulate 5000
software does not allow for control of real I/O.
Use RSLogix Emulate software for:
y Troubleshooting ⎯ Stop the process whenever a selected rung goes true, effectively
freezing the process at the instant that any error occurs.
y Ladder Logic Scanning Options ⎯ Scan your ladder logic continuously, one program
scan at a time, rung-by-rung, or select a specific block of rungs to emulate. Selecting a
block of rungs lets you isolate a particular section of the program for testing purposes.
You can also set trace points to trace application program tags and set break points to
halt program execution at predetermined locations.
RRSSLLooggiixx EEmmuullaattee 55000000 RReeqquuiirreemmeennttss
DDeessccrriippttiioonn DDeessccrriippttiioonn
Personal computer
IBM-compatible Intel Pentium II 300 MHz or Celeron 300A
(Pentium III 600 MHz recommended)
Operating system
Supported operating systems:
Supported operating systems:
• Microsoft Windows XP with Service Pack 1or greater
• Microsoft Windows 2000 with Service Pack 2 or greater
• Microsoft Windows NT version 4.0 with Service Pack 6A or greater
RAM 128 MB of RAM min
Hard disk space 50 MB of free hard disk space
Video requirements
16-color VGA graphics display
800 x 600 or greater resolution
RSLogix Emulate 5000 software includes RSTestStand Lite software. RSTestStand Lite
software lets you create virtual operator consoles that can help test your application code.
RSTestStand Lite software can be upgraded to the standard version by ordering catalog
number 9310-TSTNDENE.
RSLogix Emulate 5000 and RSTestStand Lite software are included with RSLogix 5000
Professional software.