Specifications

33
1768-SG001A-EN-P -- March 2006
CompactLogix Selection Guide
CCoommmmuunniiccaattee wwiitthh OOtthheerr CCoonnttrroolllleerrss
The 1768 CompactLogix controller can communicate with these controllers.
CCoonnttrroolllleerr EEtthheerrNNeett//IIPP
DDeevviicceeNNeett7
RRSS--223322 ((DDFF11)) DDHH--448855
1756 ControlLogix yes yes yes yes
1769 CompactLogix yes yes yes yes
1789 SoftLogix5800 yes yes yes no
1794 FlexLogix yes yes yes yes
5720 PowerFlex 700S
DriveLogix
yes yes yes no
1785 PLC-5 yes‡§
yes♣
yes na
1747 SLC yes
yes♣
yes yes
1761 MicroLogix yes
yes♣
yes yes
1762 MicroLogix yes
yes♣
yes
yes
1769 MicroLogix yes
yes♣
yes
yes
1772 PLC-2 na na
yesa
na
1775 PLC-3 na na
yes
na
5250 PLC-5/250 no na yes na
For EtherNet/IP control:
• a ControlLogix controller requires a 1756-ENBT module.
• a FlexLogix controller requires a 1788-ENBT card.
• a 1768 CompactLogix controller requires a 1769-ENBT module.
• a 1769 CompactLogix controller must be a 1769-L32E or 1769-L35E controller.
• the PC for a SoftLogix5800 controller requires appropriate hardware for Ethernet communications.
7For DeviceNet access, use either a 1769-SDN scanner (control I/O and send/receive messages) or a 1761-NET-DNI interface (messaging bridge).
‡The Ethernet PLC-5 processor must be one of these:
• series C, revision N.1 or later.
• series D, revision E.1 or later.
• series E, revision D.1 or later.
§The 1785-ENET Ethernet communication interface module must be series A, revision D or later.
♣The PLC-5, SLC, and MicroLogix processors appear as I/O points to the Logix controller. Requires 1761-NET-DNI DeviceNet interface.
Use a 1747-L55x controller with OS501 or later.
aThe PLC-2 controller requires a 1771-KG module for serial (DF1) communications.
The PLC-3 controller requires a 1775-KA module for serial (DF1) communications.
CCoommmmuunniiccaattee wwiitthh OOtthheerr CCoommmmuunniiccaattiioonn DDeevviicceess
The 1768 CompactLogix controller can communicate with these communication devices.
CCoommmmuunniiccaattiioonn DDeevviiccee EEtthheerrNNeett//IIPP
DDeevviicceeNNeett7
RRSS--223322 ((DDFF11)) DDHH--448855
9355 RSLinx software yes yes yes yes
1784-KTC, -KTCx, -
KTCx15, -PCIC(S), -PCC
na na na na
1784-PCIDS, -PCD na yes na na
1788-CN2DN na yes na na
1788-EN2DN yes yes na na
1788-CN2FF na na na na
1203-CN1 ControlNet
module‡
na na na na
1203-FM1/FB1
SCANport§
na na na na
The 1768 CompactLogix controller requires a 1768-ENBT module to connect to an EtherNet/IP network.
7For DeviceNet access, use either a 1769-SDN scanner (control I/O and send/receive messages) or a 1761-NET-DNI interface (messaging bridge).
‡Use the generic module configuration to configure the 1203-CN1 module and a CIP generic MSG instruction to communicate with the module.
§Use a CIP generic MSG instruction to communicate with the 1203-FM1 SCANport module on a DIN rail that is remote to the controller. The remote DIN rail also requires a 1794-ACN(R)15 ControlNet adapter.