Quick Start Owner manual

189Publication IASIMP-QS001C-EN-P - October 2009 189
Chapter
14
Create a PanelView Plus Application
In Chapter 10, you used ladder logic in the RSLogix 5000 programming software to create a
push button that controlled an LED indicator on a digital output module. In this chapter you
create a push button and a multi-state indicator in FactoryTalkView software that use that
ladder logic. You also transfer the application to the PanelView Plus so you can test
communication with the controller.
Before You Begin
Prepare the PanelView Plus, see Chapter 6
Create a project in RSLogix 5000 programming software, see Chapter 10
What You Need
FactoryTalkView Machine Edition software