Quick Start Owner's manual

76 Rockwell Automation Publication IASIMP-QS025B-EN-P - December 2012
Chapter 5 Create a Logix Designer Project
12. Right-click the OB16_Light tag
name and choose New
OB16_Light.
OB16_Light is an alias tag for the
I/O point tag name. With an alias
tag, you assign a simple name to a physical I/O point address.
13. From the Type pull-down menu,
choose Alias.
14. In the Alias For pull-down menu,
browse to the local 1769-OB16
output module choose any bit.
This example uses
Local:4:O.Data.0.
15. Click Create and Close.
16. The graphic shows the Output
Energize after assigning the Alias
tag to a point on the output
module.
17. Save your changes.