Quick Start Owner's manual

38 Rockwell Automation Publication IASIMP-QS025B-EN-P - December 2012
Chapter 2 Prepare the Computer and Load Controller Firmware
4. Click OK to keep the
default name.
The Configure
driver:AB_ETHIP-x dialog box
appears. The full name of the
dialog box varies by what driver type was chosen in step 3
.
This example uses the EtherNet/IP Driver; the driver name is AB_ETHIP-1.
5. Select an Ethernet card and
click OK.
This new driver is available.
6. Verify that the driver’s Status is
Running and click Close.