Quick Start Owner's manual

Rockwell Automation Publication IASIMP-QS025B-EN-P - December 2012 37
Prepare the Computer and Load Controller Firmware Chapter 2
Configure an EtherNet/IP Driver in RSLinx Classic Software
1. Start the software.
2. From the Communications menu,
choose Configure Drivers.
The Configure Drivers dialog box
appears.
3. From the Available Driver Types
pull-down menu, choose
EtherNet/IP Driver or Ethernet
devices and click Add New.
We re c ommen d t hat you us e
EtherNet/IP Driver.
The Add New RSLinx Classic
Driver dialog box appears.