Quick Start Owner's manual

Rockwell Automation Publication IASIMP-QS025B-EN-P - December 2012 15

Preface

Parts List

Table 3 lists the hardware used in this quick start. The minimum hardware you need depends on

the options and examples you choose to complete.

For example, if you do not intend to use a DeviceNet network to complete tasks described in

some publications listed in Tab le 1

, you do not need the hardware related to installing a

DeviceNet network.

Specific hardware requirements are listed at the beginning of each chapter.

Table 3 - Parts Used with This Quick Start



Quantity Cat. No. Description

2 or 3 N/A DIN rail (steel, not aluminum)

1 1769-L27ERM-QBFC1B CompactLogix 5370 L2 controller

1 1769-OB16 Compact 16-point 24V DC sourcing output module

1769-ECR

(1)

(1) This part ships with the CompactLogix 5370 L2 controller.

Compact I/O right end cap/terminator

1 1783-EMS08T Stratix 6000 Ethernet managed switch

1 1606-XLDNET4 Standard switched-mode power supply

1 1585J-M8PBJM-2 RJ45-to-RJ45 patchcord Ethernet cables

1 - USB cable with Type B receptacle

1769-SDN

Compact I/O DeviceNet scanner

1 1485C-P1E75 KwikLink flat cable, 75 m (246 ft)

2 1485A-T1E4 KwikLink terminator/resistor

1 1485P-P1E4-R5 KwikLink sealed micro connector

1 1485K-P1F5-C KwikLink QD cordset micro right-angle male

1 1606-XLDNET8 DeviceNet power supply

1 1485T-P1E4-B1 KwikLink power tap module