Quick Start and User Manual Owner's manual

78 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 4 Add POINT I/O
Download the Project
3. Click Download.
If you have no loads wired to your
output modules, the red status
LEDs indicators may start
blinking.
2. Click the Controller Status icon
and choose Download.
If you are using an EtherNet/IP network, after you download to the controller, the
1734 modules may show faults. Setting the chassis size as shown in the next section
should resolve these faults.
1. Move the keyswitch on your controller to Program.