Quick Start and User Manual Owner's manual

74 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 4 Add POINT I/O
5. Type a name for the
adapter.
6. Type the IP address.
Use the
Network Worksheet
located inside the back
cover as a reference.
7. Select the Chassis
Size (exact number of
POINT I/O modules
+ 1 for the adapter).
8. Verify that Open
Module Properties is
unchecked and click
OK.
The adapter is added to the
I/O configuration.
9. Right-click the 1734 POINT
network adapter module and
choose New Module.