Quick Start and User Manual Owner's manual

Publication IASIMP-QS010B-EN-P - October 2009 63
Create a Project Using RSLogix 5000 Software Chapter 3
8. Move the keyswitch on your controller to Run.
9. Select the PB Examine On instruction and press Ctrl+T.
This toggles the state from 0 to 1 (off to on).
10. Verify that the LED indicator on the digital output of the
controller turns on.
11. Press Ctrl+T to toggle the state back to 0 (off).
12. Go Offline.
Off
On
The project Path updates.
EtherNet/IP
7. Click Download.
Serial