Quick Start User guide

62 Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 4 Create a Logix Designer Project
9. Double-click the ? in the Output
Energize element.
10. Name the Output Energize
element OB4E_Light and
press Enter.
11. Right-click the OB4E_Light tag
name and choose New
‘OB4E_Light’.
OB4E_Light is an alias tag for the
I/O point tag name. With an alias
tag, you can assign a simple name to a physical I/O point address.
12. From the Type pull-down menu,
choose Alias.
13. From the Alias For pull-down
menu, browse to the 1734-OB4E
digital output module and choose
any bit.
This example uses
Local:2:O.Data.0.
IMPORTANT
Do not use spaces in the tag name. Use underscores (_) instead.