Quick Start User guide

60 Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 4 Create a Logix Designer Project
Add Ladder Logic to Test the Local Expansion Module
1. Expand the Tasks folders.
2. Right-click MainRoutine and
choose Open.
A blank MainRoutine opens.
3. From the Element Toolbar, drag
and drop an Examine On and an
Output Energize element onto the
rung.
IMPORTANT
If you do not have a 1734-OB4E module, you can use ladder logic with an embedded output point on the CompactLogix
5370 L1 controller in a similar fashion.
When using an embedded output point, instead of choosing an output point on the local expansion module, as
described in step 13 on page 62, you choose an embedded digital output point on the CompactLogix 5370 L1 controller.