Quick Start User guide

Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012 37
Prepare the Computer and Load Controller Firmware Chapter 2
3. From the Available Driver Types
menu, choose EtherNet/IP Driver
or Ethernet devices and click
Add New.
We re comm end that yo u u s e
EtherNet/IP Driver.
The Add New RSLinx Driver
dialog box appears.
4. Click OK to keep the default
name.
A Configure driver:AB_ETHxxx dialog box appears. The full name of the dialog box varies
by what driver type was chosen in step 3
.
This example uses the EtherNet/IP Driver; the driver name is AB_ETHIP-1.
5. Select an Ethernet card and
click OK.
This new driver is available.