Quick Start User guide

Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012 31
Chapter 2
Prepare the Computer and Load Controller Firmware
In this chapter, you install and configure the necessary programming and configuration software
on your computer and load firmware on your controller.
Before You Begin
Before you begin using this chapter, complete these tasks:
• Verify that your computer meets the software’s system requirements for installation and use
of the software listed in Ta ble on p a g e 14
.
• The tasks described in Chapter 1, Prepare the CompactLogix 5370 L1 Controller
Hardware on page 17, including the following:
– Install the EtherNet/IP network - Optional task because you can use a USB
cable connection.
– Install the controller and the local expansion module.
– Wire power to the controller.
– Make network connections.