Quick Start User guide

26 Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 1 Prepare the CompactLogix 5370 L1 Controller Hardware
6. Open the top terminal on the
removable connector.
7. Insert the wire connected to the
24V DC+ terminal on the external
power supply to the VDC +
terminal on the removable
connector and close the terminal.
8. Connect a wire to a 24V DC-
terminal on the power supply.
9. Connect the other end of the wire
to the VDC - terminal on the
removable connector by repeating
steps 6
and 7.
10. Plug the removable connector into the controller.
24-
28V
DC 24-28V
DC
ok
50W max.
DC ok
NEC Class 2
Power Supply