Quick Start User guide

Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012 21
Prepare the CompactLogix 5370 L1 Controller Hardware Chapter 1
2. Open the door for the SD card.
3. Insert the SD card into the SD
card slot.
You can install the SD card in one
orientation only. The beveled
corner should be at the top. An
orientation logo is printed on
the card.
If you feel resistance when inserting the SD card, pull it out and change the orientation.
4. Gently press the card until it clicks into place.
5. Close the SD card door.