User Manual
Rockwell Automation Publication 1769-UM004B-EN-P - March 2010 21
Quick Start for Experienced Users Chapter 2
The configuration file is typically modified by using the programming software
compatible with your controller. It can also be modified through the control
program, if supported by the controller. See Channel Configuration
on page 42
for more information.
1. Apply power to the controller system.
2. Download your program, which contains the thermocouple module
configuration settings, to the controller.
3. Put the controller in Run mode.
During a normal startup, the module status indicator turns on.
Module and channel configuration errors are reported to the controller. These
errors are typically reported in the controller’s I/O status file.
Channel status data is also reported in the module’s input data table, so these bits
can be used in your control program to flag a channel error.
Step 4 Configure the module. Reference
Chapter 4
(Module Data, Status, and Channel
Configuration)
Step 5 Go through the start-up procedure. Reference
Chapter
5
(Diagnostics and
Troubleshooting)
TIP
If the module status indicator does not turn on, cycle power. If the
condition persists, contact your local distributor or Rockwell
Automation for assistance.
Step 6 Monitor the module status to check if the module is operating
correctly
Reference
Chapter
5
(Diagnostics and
Troubleshooting)