Owner's manual

Rockwell Automation Publication 1769-UM005B-EN-P - March 2012 43
Installation and Wiring Chapter 3
3-Wire Potentiometer Interconnection
TIP
The potentiometer wiper arm can be connected to either
the EXC or return terminal depending on whether you
want increasing or decreasing resistance.
EXC 3
SENSE 3
RTN 3
EXC 3
SENSE 3
RTN 3
Cable Shield (to Ground)
Potentiometer
RTD EXC
Return
Sense
Run RTD and sense wires from the module to
potentiometer terminal and tie terminal to one poin
Cable Shield (to Ground)
Potentiometer
RTD EXC
Return
Sense
Run RTD and sense wires from the module to
potentiometer terminal and tie terminal to one poin
Belden 83503 or 9533 Shielded Cable
Belden 83503 or 9533 Shielded Cable