Installation Instructions Compact I/O End Caps/Terminators Catalog Numbers 1769-ECL, 1769-ECR Topic Page Important User Information 2 Environment and Enclosure 3 North American Hazardous Location Approval 4 European Hazardous Location Approval - 1769-ECR Only 5 1769-ECL Left End Cap 6 1769-ECL Dimensions 6 1769-ECR Right End Cap 7 1769-ECR Dimensions 8 Specifications 9 About the End Caps/Terminators The 1769 controllers, such as the 1769-L32E, require end caps.
Compact I/O End Caps/Terminators Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between solid state equipment and hard-wired electromechanical devices.
Compact I/O End Caps/Terminators 3 Environment and Enclosure ATTENTION This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 meters (6562 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR Publication 11.
Compact I/O End Caps/Terminators Prevent Electrostatic Discharge ATTENTION This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment: • Touch a grounded object to discharge potential static. • Wear an approved grounding wriststrap. • Do not touch connectors or pins on component boards. • Do not touch circuit components inside the equipment. • Use a static-safe workstation, if available.
Compact I/O End Caps/Terminators 5 European Hazardous Location Approval - 1769-ECR Only European Zone 2 Certification (The following applies when the product bears the Ex or EEx Marking) This equipment is intended for use in potentially explosive atmospheres as defined by European Union Directive 94/9/EC and has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of Category 3 equipment intended for use in potentially explosive atmospheres, given
Compact I/O End Caps/Terminators 1769-ECL Left End Cap 1 2 1 1 1769-ECL Dimensions 87 mm (3.43 in.) 15 mm (0.59 in.) 118 mm (4.6 in.
Compact I/O End Caps/Terminators 7 1769-ECR Right End Cap 1 2 3 Publication 1769-IN015C-EN-P - October 2008
Compact I/O End Caps/Terminators 1769-ECR Dimensions 32 mm (1.26 in.) 18 mm (0.71 in.) 118 mm (4.65 in.) Publication 1769-IN015C-EN-P - October 2008 85 mm (3.35 in.
Compact I/O End Caps/Terminators 9 Specifications 1769-ECL, 1769-ECR - Technical Specifications Attribute 1769-ECL Bus current draw, max 5 mA at 5V DC Operating altitude 2000 m (6562 ft) North American temp code IEC temp code 1769-ECR T3C N/A Shipping weight, approx T4 130 g (0.
Compact I/O End Caps/Terminators 1769-ECL, 1769-ECR - Environmental Specifications Attribute 1769-ECL Emissions 1769-ECR Group 1, Class A CISPR 11 ESD immunity 8 kV air discharges IEC 61000-4-2 Radiated RF immunity 10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz 10V/m with 200 Hz 50%Pulse 100% AM at 900 MHz IEC 61000-4-3 1769-ECL, 1769-ECR - Certifications(1) 1769-ECL Certifications(2) 1769-ECR c-UL-us UL Listed for Class I, Division 2 Group A, B, C, D Hazardous Locations, certified for
Compact I/O End Caps/Terminators 11 Notes: Publication 1769-IN015C-EN-P - October 2008
Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.
