Quick Start

61Publication IASIMP-QS003B-EN-P - October 2009 61
Chapter
4
Prepare the PowerFlex 70 Drive
Introduction
In this chapter, you mount and wire power to a PowerFlex 70 drive. You also configure the
communication adapter and make network connections.
Before You Begin
Assemble your CompactLogix hardware (Chapter 1).
Determine which network adapter to use on the PowerFlex 70 drive:
For an EtherNet/IP network (option 1), use the 20-COMM-E adapter.
For a DeviceNet network (option 2), use the 20-COMM-D adapter.
What You Need
PowerFlex 70 drive
PowerFlex 70 communication adapter
20-COMM-E for an EtherNet/IP network (option 1)
20-COMM-D for a DeviceNet network (option 2)
Standard CAT5 Ethernet cable for EtherNet/IP system (option 1)