Quick Start

56 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 3 Prepare the Distributed POINT I/O Hardware
1734-ADN DeviceNet Adapter for DeviceNet System
1. Remove the protective
cover from the right side
of the adapter.
2. Press the adapter onto
the DIN rail.
3. Set the node address to
02 for this example.
4. Wire the KwikLink QD
Micro Cordset to the
1734-ADN connector.
5. Connect the QD Micro
Cordset to a KwikLink
sealed micro connector
on the DeviceNet
network.
Connect To
Red V+
White CAN High
Bare Shield
Blue CAN Low
Black V-
retpad
A
suta
t
S
teNeciveD
sutat
S
suBtnioP
s
utat
S
NDA-4371
dleiF
rewoP
m
e
tsyS
rewoP
PowerFlex 70 Drive
with
20-COMM-D
KwikLink Sealed
Terminator
KwikLink Sealed
Terminator
KwikLink Sealed
Micro Connector
1769-SDN
DeviceNet Module
1606-XLDNET8
Power Supply