Quick Start

53Publication IASIMP-QS003B-EN-P - October 2009 53
Chapter 3
Prepare the Distributed POINT I/O Hardware
Introduction
In this chapter, you install the 1734 POINT network adapter and the 1734 POINT I/O
modules.
Before You Begin
• Assemble your CompactLogix hardware (Chapter 1).
• Determine which of these network adapters to use:
– For an EtherNet/IP network (option 1), use the 1734-AENT adapter.
– For an DeviceNet network (option 2), use the 1734-ADN adapter.
• Select the appropriate mounting base for the I/O modules:
– For the 1734-IT2I module, use the 1734-TBCJC mounting base
– For all other modules, use the 1734-TB or 1734-TBS mounting base.
What You Need
• POINT I/O adapter: 1734-AENT or 1734-ADN
• POINT I/O mounting bases: 1734-TB or 1734-TBS, and 1734-TBCJC
• A digital POINT I/O module. This example uses 1734-OB4E, however, other POINT
I/O modules can also be used but are not required.
• 1794-PS3 or 1794-PS13 power supply
• DIN rail
• Standard CAT5 Ethernet cable for EtherNet/IP system (option 1)