Quick Start

30 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 1 Prepare the CompactLogix Hardware
2. Assemble the DeviceNet
network cable system
using the KwikLink flat
cable, terminators, and
sealed micro connectors
for each device.
See instructions included
with devices.
3. Wire a KwikLink QD
Micro Cordset to the
1769-SDN connector.
4. Connect the QD Micro
Cordset to a KwikLink
sealed microconnector on
the network.
5. Connect the DeviceNet
KwikLink power tap to
the power supply Output
connector.
6. Connect the DeviceNet
power tap to the
DeviceNet network.
Connect To
Red V+
White CAN High
Bare Shield
Blue CAN Low
Black V-
Connect To
Red +
White Not Used
Shield Not Used
Blue Not Used
Black —
Input
AC 100-120/200-240V
N L
Isolate power before disconnecting
1606-XL
POWER SUPPLY
DC ok
Output
200W Limited Power
DC 24V / 8A
+ –
DC ok
AC 120V
AC 240V
PowerFlex 70 Drive
with
20-COMM-D
Distributed
POINT I/O
Connection with
1734-ADN Adapter
1606-XLDNET8
DeviceNet Power Supply
KwikLink Sealed
Terminator
KwikLink Sealed
Terminator
KwikLink Sealed
Micro Connector