Quick Start
Publication IASIMP-QS003B-EN-P - October 2009 129
Add Distributed Point I/O Modules to the Project Chapter 10
5. Right-click the Light and
select New ‘xxxx_Light’.
6. In the Type field, select
Alias.
7. In the Alias For field,
browse for the recorded
address below.
8. Click OK.
For EtherNet/IP, skip to
page 135
.
For Select this Address Example From
EtherNet/IP
_______:O.Data[__].__
Point_IO_Enet_Adapter:
O.Data[0].0
step 11 on page 119
adapter
name
output
module
slot #
any
bit