User Manual Manual

84 Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Chapter 4 Communication Connections
Connecting to Ethernet
You can connect directly a MicroLogix 1400 to an Ethernet network via the
Ethernet port (Channel 1). You do not need to use an Ethernet interface card,
such as the Ethernet Interface (ENI) and (ENIW), catalog number
1761-NET-ENI and 1761-NET-ENIW, to connect your MicroLogix 1400
controller to an Ethernet network. For additional information on connecting to
an Ethernet network, see Connecting to Networks via Ethernet Interface on page
327.
Cable Length Connections from to DNI
1761-CBL-AP00
1761-CBL-PM02
45 cm (17.7 in.)
2 m (6.5 ft)
SLC 5/03 or SLC 5/04 processors, channel
0
port 2
PC COM port port 2
1764-LRP processor, channel 1 port 2
MicroLogix 1400 channel 2 port 2
RS-232/485 Port (Channel 0)
Ethernet Port (Channel 1)
44606