User Manual Manual

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 309
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
For the elements of the DNP3 Slave Application Layer diagnostic counter
element offset 60 to 74, the counter values available with the structured display
in RSLogix 500/RSLogix Micro software as below.
18 ERR_PACKET_RELEASE Firmware use only
19-29 Reserved -
30 ERR_CONN_REJECTED Incoming Connection is rejected by the IP address validation.
31 ERR_INVALID_HEADER_CRC Received packet header has invalid CRC.
32 ERR_INVALID_HEADER Received packet header has invalid packet format.
33 ERR_INVALID_PACKET_CRC Received packet has invalid CRC.
34 ERR_BAD_PACKET_RECEIVED Received packet is unknown.
35 ERR_PACKET_REJECTED Received packet is rejected.
36 ERR_CONNECTION_BROKEN The connection has been broken for some reason.
37-49 Reserved -
50 ERR_INVALID_IP_ADDRESS Target IP Address is invalid.
51 ERR_INVALID_PORT Target Port Number is invalid.
52- Reserved -
Error Codes
Value (DEC) Mnemonic Description