User Manual Manual

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 93
Using the LCD Chapter 5
1. On the Main Menu screen, select Advance Set by using the Up and Down
keys on the LCD keypad. If the menu items shown in the figure below are
not displayed on the Main Menu screen, you need to scroll down the
screen by pressing the Down key.
2. Then, press the OK key on the LCD keypad. The Advanced Settings
Menu screen is displayed.
3. Select KeyIn Mode using the Up and Down keys, and then press the OK
key.
4. The Key In Mode screen is displayed. The current mode, Continuous in
this example, is selected marked up with the symbol “ ”.