Quick Start

3Publication IASIMP-QS037A-EN-P - May 2013 3
Preface
Introduction
This Quick Start Guide contains step-by-step instructions for configurating
and operating the Pump Station Controller. The Controller consists of a
standard pre-engineered package using off-the-shelf products including the
MicroLogix 1400 PLC, PanelView Component C600 HMI and PowerFlex
drives. Application files are also supplied so no PLC programming is required
and HMI screens are pre-programmed.
This package includes the PLC and HMI application code plus a full set of
system, panel, and electrical drawings that includes a bill of material. You can
download the application code and drawings by going to the Rockwell
Automation Integrated Architecture Tools Website,
http://www.ab.com/go/iatools
and selecting the “Beyond Getting Started”
tab. The Pump Station Controller application download can be found on this
page.