Manual

1 Publication 1764-UM001B-EN-P - April 2002

Chapter

Installing Your Controller

This chapter shows you how to install your controller system. The

only tools you require are a Flat or Phillips head screwdriver and drill.

Topics include:

• agency certifications

• compliance to European Union Directives

• using in hazardous locations

• master control relay

• power considerations

• preventing excessive heat

• controller spacing

• mounting the controller

Agency Certifications

• UL 508

• C-UL under CSA C22.2 no. 142

• Class I, Division 2, Groups A, B, C, D

(UL 1604, C-UL under CSA C22.2 no. 213)

• CE compliant for all applicable directives

Compliance to European

Union Directives

This product has the CE mark and is approved for installation within

the European Union and EEA regions. It has been designed and tested

to meet the following directives.

EMC Directive

This product is tested to meet Council Directive 89/336/EEC

Electromagnetic Compatibility (EMC) and the following standards, in

whole or in part, documented in a technical construction file:

• EN 50081-2

EMC - Generic Emission Standard, Part 2 - Industrial

Environment

• EN 50082-2

EMC - Generic Immunity Standard, Part 2 - Industrial

Environment

This product is intended for use in an industrial environment.