Installation Instructions Owner's manual

11
Publication 1763-IN001B-EN-P - September 2007
Controller Spacing
The controller mounts horizontally, with the expansion I/O extending to the right
of the controller. Allow 50 mm (2 in.) of space on all but the right side for adequate
ventilation, as shown below.
DIN Rail Mounting
The maximum extension of the latch is 14 mm (0.55 in.) in the open position. A
flat-blade screwdriver is required for removal of the controller. The controller can
be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. DIN rail mounting
dimensions are shown below.
Dimension Height
A 90 mm (3.5 in.)
B 27.5 mm (1.08 in.)
C 27.5 mm (1.08 in.)
ESC OK
Top
Side
Bottom
A
B
C