Instruction Manual

Publication 1762-UM001G-EN-P - March 2011
Specifications A-3
Off-state leakage current 2.5 mA max. 1.5 mA min.
Nominal impedance 12 kΩ at 50 Hz
10 kΩ at 60 Hz
3.3 kΩ 2.7 kΩ
Inrush current (max.) at 120V ac 250 mA Not Applicable
Table A.2 Input Specifications
Attribute 1762-L24AWA
1762-L40AWA
1762-L24AWAR
1762-L40AWAR
1762-L24BWA, -L24BXB, -L40BWA, -L40BXB
1762-L24BWAR, -L24BXBR, -L40BWAR, -L40BXBR
Inputs 0 through 3 Inputs 4 and higher
Table A.3 Output Specifications - General
Attribute 1762-
L24AWA
L24BWA
L24AWAR
L24BWAR
L24BXB
L24BXBR
L40AWA
L40BWA
L40AWAR
L40BWAR
L40BXB
L40BXBR
Relay and FET Outputs
Controlled load, max. 1440VA 1440VA 1440VA
Continuous current, max.
Current per group common 8 A 7.5 A 8 A 8 A
Current per controller at 150V max 30 A or total of per-point loads, whichever is less
at 240V max 20 A or total of per-point loads, whichever is less
Relay Outputs
Turn on time/Turn off time
10 msec (minimum)
(1)
Load current 10 mA (minimum)
(1) scan time dependent