User guide

Preface
MicroLogix 1000 Programmable Controllers User Manual
E–2
Paper Drilling Machine Application Example
For a detailed explanation of:
• XIC, XIO, OTE, RES, OTU, OTL, and OSR instructions, see chapter 6.
• EQU and GEQ instructions, see chapter 7.
• CLR, ADD, and SUB instructions, see chapter 8.
• MOV and FRD instructions, see chapter 9.
• JSR and RET instructions, see chapter 10.
• INT and SQO instructions, see chapter 11.
• HSC, HSL, and RAC instructions, see chapter 12.