Programmer (HHP) User guide

Chapter 3
Connecting the System
3–9
1761-CBL-PM02
1761-CBL-AP00
Cable Length Connections from to AIC+
External
Power Supply
Required
Power Selection Switch
Setting
1761-CBL-AP00 45 cm (17.7 in)
26f
SLC 5/03 or SLC 5/04 processors, channel 0 port 2 yes external
1761 L P00
1761-CBL-PM02
➁
c177i
2m (6.5 ft)
MicroLogix 1000 port 1
yes
➀
external
➀
PanelView 550 through NULL modem adapter port 2 yes external
PC COM port port 2 yes external
user supplied cable
Cable Length Connections from to AIC+
External
Power Supply
Required
Power Selection Switch
Setting
straight 9–25 pin –– modem or other communication device port 1
yes
➀
external
➀
➀
External power supply required unless the AIC+ is powered by the device connected to port 2, then the
selection switch should be set to cable.
➁
Series B cables or higher are required for hardware handshaking.