Software User Manual FRN 1.2 Owner manual

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 99
Initialize the File System
The File System Initialization option lets you do the following:
• Clear all the parameter settings made in DS Settings, for example, Scan
block, HART scan block and PID block settings.
• Clear DNP3 settings
• Clear registers
This is equivalent to selecting the following check boxes:
• Register Initialization
• DNP3 Initialization
• DS Workbench inititialization
Follow these steps to initialize the file system.
1. Set the controller into the Service mode.
2. Select the File System Initialize check box.
A dialog box appears, prompting you to confirm the initialization.
3. Click Yes.