Software User Manual FRN 1.2 Owner manual

Publication 1758-UM002D-EN-P - October 2010
18 DataSite Configuration Settings Utility (DS Settings)
Configure PC
Communication Settings
The DataSite controller can be connected to the PC via the serial port or the
Ethernet (TCP/IP) port. Use PC Communication Settings to set up the
communication mode and parameters for this connection.
Follow these steps to configure PC Communication settings:
1. From the Tools menu, choose PC Communication Settings.
The PC Communication Settings dialog box appears.
2. From the Connection Type pull-down menu, choose the type of
communication port used between the PC and the DataSite controller:
• For Ethernet communication mode, choose TCP/IP Server.
• For Serial port communication mode, choose your PC’s COM port
from one of the COM ports (COM1…COM10).