Software User Manual FRN 1.2 Owner manual

Publication 1758-UM002D-EN-P - October 2010
178 DataSite Flow Configuration Utility (DS FloConfig)
Pressure Data Type When the pressure data type is selected.
Pressure K Factor When the pressure K factor is changed.
Pressure B Factor When the pressure B factor is changed.
Temperature Register When the temperature register is changed.
Temperature Data Type When the temperature data type is selected.
Temperature K Factor When the temperature K factor is changed.
Temperature B Factor When the temperature B factor is changed.
DP Register When the DP register is changed.
DP Data Type When the DP data type is selected.
DP K Factor When the DP k factor is changed.
DP B Factor When the DP b factor is changed.
Pulse Register When the pulse register is changed.
Pulse K Factor When the pulse k factor is changed.
CH4 When the percentage level of the methane component is
changed.
N2 When the percentage level of the nitrogen component is
changed.
CO2 When the percentage level of the carbon dioxide component is
changed.
C2H6 When the percentage level of the ethane component is changed.
C3H8 When the percentage level of the propane component is
changed.
H20 When the percentage level of the water component is changed.
H2S When the percentage level of the hydrogen sulfide component is
changed.
H2 When the percentage level of the hydrogen component is
changed.
CO When the percentage level of the carbon monoxide component
is changed.
O2 When the percentage level of the oxygen component is changed.
iC4H10 When the percentage level of the i-butane component is
changed.
nC4H10 When the percentage level of the n-butane component is
changed.
iC5H12 When the percentage level of the i-pentane component is
changed.
nC5H12 When the percentage level of the n-pentane component is
changed.
Descriptions of parameter modification events (Continued)
Parameter
modification event
Condition