Software User Manual FRN 1.2 Owner manual

Publication 1758-UM002D-EN-P - October 2010
176 DataSite Flow Configuration Utility (DS FloConfig)
Understand the Event Record Format
An event record consists of the following components:
• ID: the serial number of the alarm record. The range of the ID is
0…65535. Once the number of records exceeds 65535, the ID starts
from 0 again.
• Type: See the section, Event Types
on page 176.
• Time: the date and time that the record is created. The date is in the
format, year-month-day, and time is in the format, hour:minute:second.
• Meter Run: flow meter channels 0…7.
The Meter Run column does not apply to system events.
• Data: the events that have occurred.
• Old value: previous data associated with the event.
The Old Value column does not apply to system events.
• New value: new data associated with the event
The New Value column does not apply to system events.
Event Types
This table provides a list of system events and their descriptions.
Descriptions of system events
System Event Condition
Power On When the DataSite controller powers on.
Power Off When the DataSite controller powers down.
Contract Time When the contract time in the DataSite controller changes.
Watchdog Reset When the DataSite controller’s watchdog is reset.
RTC Date When the RTC date of the DataSite controller is calibrated.
RTC Time When the RTC time of the DataSite controller is calibrated.