Software User Manual FRN 1.2 Owner manual

Publication 1758-UM002D-EN-P - October 2010
108 DataSite Flow Configuration Utility (DS FloConfig)
Start DS FloConfig
Follow these steps to start DS FloConfig.
1. Start Microsoft Windows.
2. Click Start > Programs > Rockwell Software > DataSite Products >
DataSite Tools > DS FloConfig.
The Start dialog box appears.
3. For instructions on how to create a new project, see Create a New
Project File.
For instructions on how to open an existing project, see Open a Project
File.
For instructions on how to open a recent project, see Open a Recent
Project File.
Create a New Project File
Follow these steps to create a new project file.
1. In the Start dialog box, click New Project followed by OK.