Manual

Publication IASIMP-QS008A-EN-P - March 2009 33
DataSite and Logix Integration Chapter 3
Configure ControlLogix Communication
This procedure assumes that communication to the Logix controller is using the Ethernet port. It
also assumes that your 1756-ENBT Ethernet/IP module has already been configured with an IP
address of 192.168.10.90.
For additional information, refer to the ControlLogix Controllers User Manual, publication
1756-UM051.
Follow these steps to configure ControlLogix communication.
1. Open the RSLinx Classic software, then choose Configure Drivers... from the
Communications menu.
The Configure Drivers
Window opens.
2. Select Ethernet devices
from the pull-down list.
3. Click the Add New
button.
4. Accept the default driver
name, AB_ETH-1, or
change the name and
click OK.