Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
3-16 ProcessLogix Server Installation Procedures
9. Remove the Master Disk and store it in a safe place.
10. Restart the PC.
11. If you are installing ProcessLogix software on a redundant
Server pair, return to the beginning of
Moving the RSLinx
Activation File on page 3-14 and repeat for SERVERB. Otherwise,
return to the checklist that led you to this task.
Configuring RSLinx Drivers
for ControlNet Supervisory
Network
Complete the following steps to configure the ControlNet PCIC drivers
for RSLinx.
1. Click Start ⇒ Pr ogr ams ⇒ Rockwell Software ⇒ RSLin x ⇒
RSLin x to call up the Rockwell Software RSLinx window.
2. Click Communications ⇒ Configure Drivers to call up the
Configure Drivers dialog box.
3. Select 1 7 84-PCIC(S) for Con tr olNet devices in the Available
Drivers drop-down list and click Add New to call up the Add
New RSLinx Driver dialog box.
TIP
If you need to move the activation file back to the
Master Disk,
refer to Removing the RSLinx Software
Activation File on page 4-28.
IMPORTANT
If you are using Ethernet for your Supervisory
Network,
skip to Configuring RSLinx Drivers for
Ethernet Supervisory Network on page 3-19.