Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-15
3. Verify the application title in the title bar.
• If the title is RSLi n x Li te , close RSLinx and continue with
Installing the Activation File, below.
• If the title is RSLin x OEM you already have the OEM version
installed and you do not have to install the activation file.
Close RSLinx, and return to the checklist that led you to this
task.
Installing the Activation File
1. Locate the RSLinx Master Disk and insert it into the floppy drive.
2. Click Star t ⇒ Run .
3. Enter this path or Br ow se to:
>A:(or your floppy drive letter)\EVMOVE.EXE<
4. Click OK to launch the move executive.
5. Verify that you are Moving Activations From Drive A:(or your
floppy drive letter)
To Drive C:(or your hard drive letter).
6. Click OK to initiate the move.
7. Click Mo v e to move the file to the hard drive.
8. Wait for a dialog box to indicate a successful move, and click
OK.