Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-13
16. Logon as ps_user.
17. Click Star t ⇒ Run .
18. Enter this path or Br o w se to:
>D:(or your CD-ROM drive letter)\Update\setup.exe<
19. Click OK to launch the software setup application.
20. Click Ne x t to install the ProcessLogix Update.
21. At the ProcessLogix Update Complete window, click Fin is h .
22. If prompted to reboot, click No .
ATTENTION
!
Non-redundant Server
If you are installing ProcessLogix software on a
non-redundant Server:
1. Restart the Server.
2. Logon as ps_user.
Return to the checklist that led you to this task.
ATTENTION
!
Redundant Server Pair
If you are installing ProcessLogix software on a
redundant Server pair:
1. Do not restart SERVERA.
2. Return to the beginning of ProcessLogix Software
Installation on a Clean PC on page 3-1 and repeat
for SERVERB.
3. Once you have completed these procedures for
both SERVERA and SERVERB, restart SERVERB.
4. Logon to SERVERB as ps_user.
5. When SERVERB is running, restart SERVERA and
logon as ps_user.
Return to the checklist that led you to this task.