Installation and Upgrade Guide

1 Publication 1757-IN510A-EN-P - October 2003
Chapter 3
ProcessLogix Server Installation Procedures
ProcessLogix Software
Installation on a Clean PC
Rockwell Automation delivers the ProcessLogix Server with all the
required software pre-installed. The following instructions can be
used if the system has to be reinstalled or for new installations on a
PC that was not purchased from Rockwell Automation.
The following table lists the items that you MUST complete to install
the ProcessLogix software. If you are installing ProcessLogix software
on a redundant Server pair you must complete the items on SERVERA
then repeat the same items on SERVERB.
IMPORTANT
If you purchased a new ProcessLogix R510.0 Server
from Rockwell Automation, the operating system and
ProcessLogix software have already been installed.
Do not reinstall the software. Refer to the
ProcessLogix R510.0 Server Installation Instructions,
publication 1757-IN951 shipped with your hardware.
Table 3.A ProcessLogix Software Installation on a Clean PC
✔
Step Item Page
1.
Clean System Windows 2000 Server Installation 2-2
2.
Creating the ProcessLogix User Accounts 2-26
3.
Windows 2000 Service Pack 4 Installation 2-29
4.
Windows Security Hotfix Installation 2-31
5.
Internet Explorer 6.0 SP1 Installation 2-33
6.
Updating Windows Installer 2-36
7.
Updating ISScript 2-37
8.
Additional Operating System Customization Procedures 2-38
9.
Creating Emergency Repair Disks 2-40
10.
1784-PCIC Driver Installation 7-1
11.
Installing ProcessLogix R510.0 Software 3-2
12.
Moving the RSLinx Activation File 3-14