Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
2-30 Operating System Installation Procedures
Installing Windows 2000 Service Pack 4
If you have a redundant Server pair, you must complete this
procedure on both SERVERA and SERVERB.
1. If necessary, logon to the system.
2. Insert the ProcessLogix R510.0 Supplemental Software CD into
the CD-ROM drive.
3. Click Star t ⇒ Run .
4. Enter this path or Br ow se to:
>D:(or your CD-ROM drive letter)\Win2k_SP4\W2KSP4_EN.EXE<
5. Click OK to launch the Service Pack 4 setup application.
6. At the Welcome window, click Ne x t .
7. Select the I Agr ee option and click Ne x t .
8. Select the Ar chive Files option and click Ne x t .
9. At the Completing the Windows 2000 Service Pack 4 window,
click Fin ish .
The system automatically restarts.
10. Logon to the system.
11. Click Star t ⇒ Settings ⇒ Control Panel.
12. Double-click Automatic Updates.
13. Uncheck the Keep my computer up to date checkbox and
click OK.
14. Close the Control Panel window.
The Windows 2000 Service Pack 4 installation is complete.
Return to the checklist that led you to this task.
TIP
If this is the first time starting up since the Windows
2000 operating system install, it is necessary to
remove the default startup screens.
Refer
to Removing the Default Startup Screens on
page P-4.